It Doesn't want to hot-sync with my computer - Palm Zire 72 Special Edition Handheld

I've almost the same problem. When the system turns on the monitor doesn't sync. After a variable trials with down/up the sync is enabled and the computer starts.A very clear event occurs : when the monitor can''t sync ( and system doesn't boot)you can hear very clear a high fan rotation. When I look/hear in the system the Isuspect the cpu fan. The system boots ( monitor syncs) when the fan rotationgoes from high to low. So the system hangs on an internal check on the rotation speed of the cpu fan.I've googled a lot , but until now doesn't find an answer . Possibilties which I think about : replace cpu fan , clean cpu fun ( but it looks clean).I cannot measure the fan rotation speed when the system is hanging. At normal rotation all info can retrieved witth the program cpu-z.Did you already have a solution ?

what connection are you currently using for the sync? and which version of the os are you using?

Maybe you could also try updating Palm Desktop or maybe downgrading Palm Desktop because I have that exact same PDA and I know it's old. If neither of those work, just pull a system restore or whatever you had planned.

iTunes does not load to your phone. iTunes is the program that syncs your music over to the iPhone. You have to download iTuens on to your computer, then sync the iPhone with the USB cable.
See this link:
Download the latest iTunes to your computer :
http://www.apple.com/itunes/download/
Set up iTunes syncing:

1. Connect iPhone to your computer, and open iTunes (if it doesn’t open automatically).
   
2. In iTunes, select iPhone in the sidebar.
   
3. Configure the sync settings in each of the settings panes.
   
4. Click Apply in the lower-right corner of the screen.
   By default, “Automatically sync when this iPhone is connected” is selected
   

Click on this link or copy and paste the complete link into your browser.
If I could be of further assistance, let me know. If this helps or solves the issue, please rate it.
Thanks, Joe


I’m happy to assist further over the phone at https://www.6ya.com/expert/joe_8b8c2cd6ce148309

use the palm quick install and browse through picture files and add them. You will need to first of all put the hot sync cable on your phone then hit the button on the cable connector, give it some time, if you still cant do it, read below

if it says it cant connect, go to hot sync on the home and then below the hot sync button ON THE SCREEN, Where you see switch the IR to a PC/handheld click it and go to the second option. If that still doesent work, on your PC go to all programs then look for palm, go to that file and click hot sync now the hotsync is turned on the computer then after that do all the steps in the first paragraph.


thank you

Try changing the HotSync settings
Select Desktop overwrites handheld for each conduit

Try reinstalling the Palm software from the CD into your computer. You should unistall it first and reinstall it.

Is this on a Windows Vista computer by any chance?

If u need to make connectivity between computer and Palm mobie then u need to install hot sync software on ur Pc and activate hotsync option from ur mobile then with cable u can transfer the data . if u  not have proper software of hotsync then download it from palm Site.

 

Gizmo1

it is possible but if I well understood u wanna hot sync with ur laptop calendar and contact from ur Tungsten E, (that is having updated data from ur office computer). you can in fact synchronize verything there with ur laptop, and make ur hand held over write ur whatever is in ur laptop, for this u need to install the PDS and go to the hotsync manager on ur system try, go to custom and and on the list of conduits go to contact and change the action to hh overwrite desktop, (do the same for calendar) DON"T FORGET TO CHECK THE OPTION : MAKE AS DEFAULT. U can of course disable the rest except the system conduit. Never forget to set the conduits u change to set as defaults. Like this, u must have always updated data on ur hand-held, for this, u need to keep synchronizing with ur office computer. good luck,

Create a new Sync profile and check it again