I need to use the 3 way conference caller, how do I set this up?

Place your first caller on hold, call the second person to on the conference, press the conf key (or feature 3) and press the held linewith the first caller.

Once you receive your first call Press conference button. your first call will automaticaly be on hold. Press a line button to dial second number. Once call is connected Press conference button and you will have 3 way conference.
To add more PeoPle into conference Press conference button again and select a new line. Dial the number and Press conference button to connect everyone to that conference.

HoPe this helPs

Here are the instructions for making a conference call on a Norstar system.

Conference [Feature] [3]

• Establish a conference call between yourself and two other parties.

1. Make or answer the first call.
2. Put the first call on hold.
3. Make or answer the second call.
4. After the second call is connected, press [Feature] [3].
5. Press the line or intercom button of the first held call.
6. Press [Rls] to end the conference call

• To remove yourself from a conference permanently (unsupervised conference):

• Press [Feature] [7] [0]. The other two callers remain connected. (Some external lines may not support this feature.)
• To put a conference on hold:
• Press [Hold]. The other two callers can still talk to each other.
• To split a conference:
• Press the line or intercom button of one caller to consult privately while the other caller is on hold. To re-establish the conference, press [Feature] [3].
• To disconnect one party:
• Press the line or intercom button of the caller you want to disconnect, then press [Rls].
• Press the line or intercom button of the remaining caller to resume your conversation.
• To independently hold two calls:
• Press the line or intercom button of the first caller, then press [Hold]. The second caller is automatically put on hold. To re-establish the conference, retrieve one call from hold, press [Feature] [3], then retrieve the second call from hold.

Here are the instructions for making a conference call on a Norstar system.

Conference [Feature] [3]

• Establish a conference call between yourself and two other parties.

1. Make or answer the first call.
2. Put the first call on hold.
3. Make or answer the second call.
4. After the second call is connected, press [Feature] [3].
5. Press the line or intercom button of the first held call.
6. Press [Rls] to end the conference call

• To remove yourself from a conference permanently (unsupervised conference):

• Press [Feature] [7] [0]. The other two callers remain connected. (Some external lines may not support this feature.)
• To put a conference on hold:
• Press [Hold]. The other two callers can still talk to each other.
• To split a conference:
• Press the line or intercom button of one caller to consult privately while the other caller is on hold. To re-establish the conference, press [Feature] [3].
• To disconnect one party:
• Press the line or intercom button of the caller you want to disconnect, then press [Rls].
• Press the line or intercom button of the remaining caller to resume your conversation.
• To independently hold two calls:
• Press the line or intercom button of the first caller, then press [Hold]. The second caller is automatically put on hold. To re-establish the conference, retrieve one call from hold, press [Feature] [3], then retrieve the second call from hold.

Here are the instructions for making a conference call on a Norstar system.

Conference [Feature] [3]

• Establish a conference call between yourself and two other parties.
  1. Make or answer the first call.
  2. Put the first call on hold.
  3. Make or answer the second call.
  4. After the second call is connected, press [Feature] [3].
  5. Press the line or intercom button of the first held call.
  6. Press [Rls] to end the conference call
• To remove yourself from a conference permanently (unsupervised conference):
  • Press [Feature] [7] [0]. The other two callers remain connected. (Some external lines may not support this feature.)
• To put a conference on hold:
  • Press [Hold]. The other two callers can still talk to each other.
• To split a conference:
  • Press the line or intercom button of one caller to consult privately while the other caller is on hold. To re-establish the conference, press [Feature] [3].
• To disconnect one party:
  • Press the line or intercom button of the caller you want to disconnect, then press [Rls].
  • Press the line or intercom button of the remaining caller to resume your conversation.
• To independently hold two calls:
  • Press the line or intercom button of the first caller, then press [Hold]. The second caller is automatically put on hold. To re-establish the conference, retrieve one call from hold, press [Feature] [3], then retrieve the second call from hold.

Conference [Feature] [3]

• Establish a conference call between yourself and two other parties.

1. Make or answer the first call.
2. Put the first call on hold.
3. Make or answer the second call.
4. After the second call is connected, press [Feature] [3].
5. Press the line or intercom button of the first held call.
6. Press [Rls] to end the conference call

• To split a conference:
• Press the line or intercom button of one caller to consult privately while the other caller is on hold. To re-establish the conference, press [Feature] [3].

• To independently hold two calls:
• Press the line or intercom button of the first caller, then press [Hold]. The second caller is automatically put on hold. To re-establish the conference, retrieve one call from hold, press [Feature] [3], then retrieve the second call from hold.

To establish a conference call between yourself and two other parties.
1. Make or answer the first call.
2. Put the first call on hold.
3. Make or answer the second call.
4. After the second call is connected, press feature button then 3.
5. Press the line or intercom button of the first held call (not required on the
T7100/M7100 telephone).
6. Press Release to end the conference call.
To remove yourself from a conference permanently
(unsupervised conference):
Press feature buton then 70. The other two callers remain connected. (Some
external lines may not support this feature. See your system
administrator.)
To put a conference on hold:
Press hold. The other two callers can still talk to each other.
To split a conference:
Press the line or intercom button of one caller to consult privately while
the other caller is on hold. To re-establish the conference, press
feature button then 3.
To disconnect one party:
Press the line or intercom button of the caller you want to disconnect,
then press Release button. Press the line or intercom button of the remaining
caller to resume your conversation.

thats very simple,simple when you press CNF dial the number when the call recieved press join & the number 3 for a two sec .you will be connected

Here are some steps that should help. I don't think that you can Conference call You can hold a 3-way conversation (conference call) between your handset, an external caller and another internal handset user. During an external call: 1 Press . The external caller is put ?on-hold?. 2 Press or to select name, number or the handset you want to have a conference call with and press or key. The called handset will ring. 3 When the called handset answers, press to start your conference call. 4 Any handset can press at any time to leave the conference call. It looks like you can use the multiple system sets together, but the system is not designed to do what you are asking for. Please repost with any other comments or questions. Please rate this solution through fix-it. Thank you.