The SSID is the name given to a wireless network when a network is created. You can choose to broadcast or not broadcast the SSID of the network. If you hidden the SSID, then your wireless network will not be "visible" to other computers looking to join the wireless network, meaning that computers will only be able to join your network if they know the SSID beforehand.The SSID would be found on the router. This is for a printer that has wireless printing capabilities.On your computer click on the wireless network indicator in the status bar and you can see the SSID of the router the system is currently connected to.
Print the network
settings page to identify if your printer is connected to your wireless
network:
1. Press Setup on
the printer operator panel.
2. Press the right or left arrow button until Network
Setup is displayed, press OK.
3. Press OK at Print Setup Page.
4. Press OK when prompted to Load Paper.
5. Press OK. The network settings page will now
print.
Check the Network Card Status, SSID, Trouble Code, TCP/IP Address.
SSID should be the name of your wireless network. Otherwise, you may need to
reset the printer's wireless network settings.
How to
reset network settings:
1. Press Setup.
2. Press the right or left arrow button until Network
Setup is displayed, press OK.
3. Press the right or left
arrow button until Reset Network Adapter Defaults is
displayed, press OK.
4. Press the right or left arrow button to display Yes,
pressOK.
Once the Wi-Fi light turns on to solid orange, run the Lexmark
Wireless Setup Assistant on your Mac.
231 views
Usually answered in minutes!
×