Hi id like to reboot my vista without having to download anything or using the disc

boot into safe mode with networking ,run malwarebytes and get that to remove the virus. if your disc isn't compatible you can try using neo-smart's recovery discs (http://neosmart.net/blog/2008/windows-vista-recovery-disc-download/)and burn that to disc and recover your vista that way

best of luck :)

Your best bet is to contact the person or company you purchased this software from. Contacting Microsoft about this issue will not resolve anything, as Microsoft didn't sell you the item. You can install Windows Vista using this Upgrade disc without a product key but you will not be able to login after 30 days of no product key.

Hi there,

If you have the Windows XP / Vista / 7 DVD, that would be your disk. If you don't, you could just as well borrow a copy off a friend as long as you have your own product key. Once you have the disk you can boot from the DVD.

You can use a torrent site like isoHUNT, to download a copy of the Acer OEM vista disc, this is a little illegal, but if you use your own Windows key from your COA sticker, it should register and activate ok.
You may have to download your drivers seperatly from from ACER.
You will need a torrent client like UTorrent, and the download could take a day or so

If you have another Administrator id, log in to it and remove the password for the protected account. Restart your PC and go into safe mode. You might find an administrator account without a password.
If such an administrator accout does not exist. Go to ophcrack.com and download a live OPHcrack disc for Vista. Insert the disc and reboot your PC. The disc will take you into a mini Linux where a program will automatically run and will reveal your password.
Warning, this measure is to test password strenght, not for illegal purposes

problem:nt device loader error message
Solution: Reinstall windows

hi check this link for your drivers

http://support.ts.fujitsu.com/com/support/linkapplication.html?LNG=EN&ID=25510

regards

Can you still log in to Windows Vista?
e machine has a RECOVERY MANAGEMENT allows you to restore sytem to factory default or reboot and tap F10 and follow instructions.

Good Luck!

Normal 0 You need to go to the manufactures site and download the VISTA driver for the camera. Then follow the info below to install the program.



Try disconnecting the Camera from the USB port and reinstall the CD or Downloaded software program. When the program asks you to connect the camera to the USB port, do so and it should work.
Hope this helps. Bud

Try updating the Media Center using Windows Update, this could give you a recent fix.