At Fixya.com, our trusted experts are meticulously vetted and possess extensive experience in their respective fields. Backed by a community of knowledgeable professionals, our platform ensures that the solutions provided are thoroughly researched and validated.
My Dishwasher workedd fine last night, today, I loaded it, shut the door and tried to turn it on. The start light keeps blinking, I hit cancel and it stopped, I tried to reset it by alternating the dry and sani rinse button, but that didnt work, usually it will send the dishwasher into test mode and fill up, but all the lights just stayed lit up. I canceled again and the lights went off. I cannot get it to work. The start button just keeps blinking and it wont cycle. I think I hear it laughing at me. HELP PLEASE!
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
sounds like a fuel pump or maybe check on the asd relay or fuel pump relay try taking them off and tap on them then try to start if no start sounds like a fuel pump or timing belt issue. good luck
sounds like a stuck key pad since you said the normal wash button flashed.. the other thing is try holding the door shut while you run it.. to see of it is maybe not latching properly..
Kaclf, If you have no lights at all, dishwasher unresponsive, it's probably one of two things. First check the junction box where the cord hooks up to the dishwasher. Sometimes I find a bad connection in the wire-nut. Second, there is a thermal fuse that sits on the control board. You will have to remove the inside panel. You want to see if it's blown. It will be sitting on the top side of the board, two wires going to it. Catriver
×