My mp3 doesn't work

Try to find a driver for a simlar device and use that, if it doesn't work ring up the manufacturer, if that doesn't work dual boot xp or what ever os works and use it that way.
Hope it helps

Steven Cumming
Please leave positive feedback :-)

my samsung YP-U5AB/MEA is not working when i'm turning it on , the screen doesn't turn on but when i put it on the computer i can save things on it but it doesn't work ....help please ???

charge it via the computer

Please download it here :
www.sandisk.com/sandisk-support/driver-download-wizard
www.computing.net > Forums > Drivers

Hello,

Blue ring faillure could be solved, trying to reset the e250.
How to reset:
1. Press and hold the Power/Menu button for approximately 20 seconds.
2. Release the Power/Menu button.
3. Press the Power/Menu button again to turn on the player.


Only if the reset action above did not help,
reload and update to the latest firmware.

Installing firmware will erase all data from the player !

• Step 1: Switch to MSC mode.

How to switch to MSC mode:
1. Turn device OFF.
2. Slide the hold switch to the direction of the headphone jack so an orange color would show putting the device on Hold.
3. Press and hold the ( |<< ) button while connecting the device to the PC.

• Step 2: Update to the latest firmware.

See next site for how to update the firmware:
http://kb.sandisk.com/app/answers/detail/a_id/306
Follow the information in the link.

The easiest way would be using the automatic Sansa Firmware Updater. Directly to the download Sansa Firmware Updater .

Need more help ? Just post a comment.

You may need to reset the Sansa by powering it off and then taking out the battery for two minutes and then put it back in and repower.

http://www.fixya.com/support/r3771170-phone_water_damage

Once you unplug it from your computer, there is a switch on the left hand side, slide it up and hold it until your device turns on

http://www.sandisk.com/DriverDownload/driverList.asp

Enter model number and choose OS - Vista

Run the recovery tool from the SanDisk website. Make sure you select "format" when prompted.

http://www.sandisk.com/Assets/File/Downloads/firmware/e200fw01.00.12.exe

You need to put the device into "recovery mode" before you run the tool.

- Turn the device off (hold power for 20 seconds)
- Slide the hold switch into "hold" position.
- Press and hold the "record" button while connecting it to your computer. Keep holding the "record" button until you see the "new hardware found" on your computer.

Then run the recovery tool. Select format when prompted.





Best of Luck.