Washing Machines Logo

Related Topics:

Posted on Jul 14, 2008

7KG WD-8050FH LG Clean Master Front Loader (5 stars) No Drain ....won't drain or spin

  • Anonymous Nov 06, 2008

    My machine will not wash or spin, but you can get it pump out the water

  • Anonymous Feb 09, 2009

    My machine washes & spins but won't drain. I'm fairly positive its the pump! It shouldn't be more the $80 or $90 for the part then there's the cost of labour to install. :-( Still cheaper than a replacement!

×

1 Answer

Anonymous

Level 1:

An expert who has achieved level 1.

  • Contributor 1 Answer
  • Posted on Aug 14, 2010
Anonymous
Contributor
Level 1:

An expert who has achieved level 1.

Joined: Aug 14, 2010
Answers
1
Questions
0
Helped
1110
Points
2

I had same problem and i have opened the the water pump and found some tissues blocked the fan from spining , i remove it and immediatly worked .

Add Your Answer

×

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2helpful
2answers

I have LG Washing Machine and the water does not drain whilst the machine is washing. What can be wrong?

problem is with main board MOSFET ,FET or Transistor , that are not switching your drain pump at right time , if your'e pump is fine, , you should check drain pump separately by giving it separate supply. ( see its data sheet for power )
0helpful
1answer

I have a LG WD 1238C Front Loader Washing Machine and the display has a CL on it.

Remove power for some time , allow the power to drain off the memory and see if the display is clear. If not hold the start button and switch on power. Check the inlet and drain filter , free water flow, if not remove and clean.
0helpful
1answer
0helpful
1answer

I have an LG front loader - model WD - 804 90TP and the machine is working but it gets down to 6 mins to run the spin cycle and then goes up to 14 mins and then back down again and carries on in that cycle...

You need to check the inlet valve for good flow of the water as a SLOW water pressure can increase the timing for rinse and spin.
Similarily the DRAIN pump/valve must be checked as if this is clogged then the drain flow will be LOW and the timing will extend for full drain. Remove and clean the drain pump and it can be the reason that the clothes are still wet.
Finally check on the controller for the proper timing of the cycle.
Tips on Cleaning a pump:
http://www.youtube.com/watch?v=zKjKi50YBpI&NR=1&feature=fvwp
1helpful
2answers

The door is jammed on my LG Intellowasher WD-1023C-Washing Machine - Front loader. It has finished it's wash cycle, but the door won't open

Slide a paint scraper or similar between the machine and the latch side and push it quite hard and it should open. Mine does and I found the fix on this site!
2helpful
1answer

Front loader won't spin and is filled up with water. Won't drain.

Hi,

Problems with a washing machine not spinning or not draining are often inter related..

If you are having a problem with your top load washer then check out this tip...

Washing Machine does not Pump or Spin


If you are having problems with your front load washing machine then checkout this tip...

Front Load Washing machine not draining and or not spinning


heatman101

2helpful
1answer

I have a 7kg front loader which was half way through a cycle before stopping. It makes a warning noise and then SE or 5E flash on the display. It won't spin or drain and now I cannot open the door to get...

Hi dear.5E code meaning on Samsung washer's,DRAIN fault.1-Please check drain hose for kink or clogged where it gets end.2-Please slowly open the machine's filter & drain the water inside the washer.Take out the filter & check it,if there is any thing blocks the filter or pump,try to clean it & put it back.It should comes back to normal.(If non of that's happening you might have defactive pump,call service centre.)Run the spin program & make sure it's draining now.I hope that helps.Thanks.
0helpful
1answer

LG front loader WD 8050FH

Be sure to remove the pin catcher assembly, at the bottom front right of the machine. Usually a small door at lower right side. Tip machine back and unscrew the large handle and remove to clean.
4helpful
1answer

OE error code on LG front loader

The OE error code means:-

The Drain hose is kinked or blocked or the drain filter is blocked

Solution:-
Clean and straighten the drain hose and clean the drain filter
Not finding what you are looking for?

1,120 views

Ask a Question

Usually answered in minutes!

Top Washing Machines Experts

Brad Brown

Level 3 Expert

19187 Answers

Cindy Wells

Level 3 Expert

6688 Answers

john h

Level 3 Expert

29494 Answers

Are you a Washing Machine Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...