When I turn on my TV it goes straight to the menu screen. You can still hear sound but no picture. When I try to exit you see the picture for about a second then it automatically flashes back to the menu screen. Even if I try to use the functions in the menu screen it flashes right back to the main menu screen. Very frustrated...need help!
When I turn on my TV it goes straight to the menu screen. You can still hear sound but no picture. When I try to exit you see the picture for about a second then it automatically flashes back to the menu screen. Even if I try to use the functions in the menu screen it flashes right back to the main menu screen. Very frustrated...need help!
I just did the software upgrade and it was simple and it fixed my problem of the TV reverting to the Menu. Go to philips.com and type in the model number of your TV. Click on the Firmware Upgrade Software link and download the autorun.upg file to a USB drive. Instructions on upgrading your TV software can be found here:http://www.p4c.philips.com/files/3/37pf9...
Good luck!
×
Verify in customer menu, installation, software upgrade, current software info that software is 1.5.0.0. if not upgrade by downloading from p4c.philips.com website and upgrade via usb memory stick. if upgrade is successful and menu still pops up would be a small signal board issue
883 views
Usually answered in minutes!
exact same problem. some mornings it takes 5 minutes, some mornings half an hour. today it began to come up even during watching it... i suspect at some point it will come up and not turn off. tv is perhaps 2 years old.
×