Dewalt DW056 18 Volt Cordless Impact Driver - 1/4" Drive Hex Shank (Battery Charger and Case Not Included) - Tool Only Logo
Posted on Jul 13, 2008
Answered by a Fixya Expert

Trustworthy Expert Solutions

At Fixya.com, our trusted experts are meticulously vetted and possess extensive experience in their respective fields. Backed by a community of knowledgeable professionals, our platform ensures that the solutions provided are thoroughly researched and validated.

View Our Top Experts

I just bought a DW735 planer and ran a 6" x 24" piece of 3/4" poplar through it, with the planer set to remove 1/16" of thickness. I used the speed 1 (slow). It ran through fine, but I got several irregularly spaced ridges about 1/64" to 1/32" wide that ran the length of the board. The ridges are about 1/64" high, protruding up from the main reduced thickness of the board. The same thing happened over and over again. Is this normal? Do I have to return the machine for a blade change? I have not taken the machine apart to inspect the blades.

Answer This Question

1 Answer

Anonymous

Level 2:

An expert who has achieved level 2 by getting 100 points
MVP:

An expert that got 5 achievements.
Champion:

An expert who has answered 200 questions.
Governor:

An expert whose answer got voted for 20 times.

  • Expert 313 Answers
  • Posted on Jul 13, 2008
Anonymous
Expert
Level 2:

An expert who has achieved level 2 by getting 100 points
MVP:

An expert that got 5 achievements.
Champion:

An expert who has answered 200 questions.
Governor:

An expert whose answer got voted for 20 times.

Joined: May 24, 2008
Answers
313
Questions
0
Helped
239091
Points
403

Where is the ridges happened at the begining of the board or at the end of the board. if its the middle of the board the problem is the roller sleeve may be worn.secondly the roller may have lots of sap from the wood/varsol can do job for cleaning the roller. 3. is the balde. see www.toolpartsdirect.com for the parts diagram,in large the picture

Add Your Answer

×

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

0helpful
1answer

My dewalt dw735 planer will not turn on
https://www.dewalt.com/products/power-tools/routers-planers-and-joiners/planers-and-joiners/13-in-three-knife-two-speed-thickness-planer/dw735
You have to register to read the information (BAD, Dewalt. Bad dog.)

In general>
Check outlet, try another AC outlet.
Check power cord end to end for damage. Do you have a non-contact AC indicator? (You should) Are you getting AC to the machine?
Check built in fuse or breaker on the tool.
Check the switch, does it feel and sound like it is switching correctly? Or is something different?
Read full answer
Nov 19, 2019 • Dewalt Saws
0helpful
1answer

How do I properly conntect the wires between the switch, the reset and what I think is a relay on a DW735.
Without a view of your saw....I usually do 1 of 4 connections.
1) solder them in place 2) use the appropriate 'spade' connector 3) use an insulated "but" connector. 4) twist the correct wires together, solder, and insulate them
Read full answer
Dec 11, 2017 • Dewalt DW735 13 Inch 2 Speed Planer With 3...
0answers

Need owners manual
Read full answer
Be the first to answer Jan 17, 2016 • Dewalt DW735 13 Inch 2 Speed Planer With 3...
0helpful
1answer

Does this belt 429962-08 fit on dewalt dw735 planer? I found that belt on amazon.com. But I can't find the 5140010-28 belt.
No it goes to a dw733 or 734 12 1/2in
look on ereplacementparts.com
Read full answer
Mar 07, 2015 • Dewalt DW735 13 Inch 2 Speed Planer With 3...
0answers

How long does a board have to be to safely plane it in the dealt 3 blade 2 speed planer?
Read full answer
Be the first to answer Mar 04, 2015 • Dewalt Planer - 13in.W, 3-Knife, 2-Speed,...
0helpful
3answers

My dewalt planer dw735 just made a loud pop sound. Then, a piece of metal launched out of the dust ejector, a few sparks flew. I tool the top od and found a hunk of wood that broke of the board jamming the...
have you checked you have not taken a chunk out your blade. also you have to make sure the blades are set spot on. other wise it will affect the balance. good kuck
Read full answer
Dec 20, 2014 • Dewalt DW735 13 Inch 2 Speed Planer With 3...
0helpful
2answers

Replace v belt on dw735 planer
REMOVE COVER SO YOU CAN SEE THE BELT, PULL THE BELT AS YOU TURN IT AND IT SHOULD COME OFF
Read full answer
Nov 07, 2014 • Dewalt DW735 13 Inch 2 Speed Planer With 3...
0helpful
1answer

My dewalt dw735 planer won't turn on. i pressed the reset switch still no-go
Check the switch with a continuity tester.
Read full answer
Sep 28, 2013 • Dewalt DW735 13-Inch Two Speed Thickness...
0helpful
1answer

Dw735 planner thickness
Is it cold in your shop? The rollers won't work if they're cold because the rubber gets stiff. Clean your rollers also with mineral spirits. Hope that helps.
Read full answer
Jul 11, 2013 • Dewalt DW735 13 Inch 2 Speed Planer With 3...
0helpful
1answer

Dewalt DW735 planer (chips inside the main housing)
Common problem. As long as the chip/dust doesn't impede the dust collection or interfere with anything else, it's normal, and to be expected.
Read full answer
Feb 04, 2018 • Dewalt DW735 13 Inch 2 Speed Planer With 3...
Not finding what you are looking for?

View Most Popular

DW056 18 Volt Cordless Impact Driver - 1/4" Drive Hex Shank (Battery Charger and Case Not Included) - Tool Only

  • Drills

Related Question

My dewalt dw735 planer will not turn on

  • Dewalt Saws

Related Topics

161 views

Ask a Question

Usually answered in minutes!

Popular Questions

Broken dewalt battery 18v lithium ion

Dewalt DC920KA Heavy Duty Xrp 18V...

Dewalt battery charger won't charge

Dewalt DW056 18 Volt Cordless Impact...

My charger displayed cold/hot pack

Dewalt DC920KA Heavy Duty Xrp 18V...

Jaws won't tighten or loosen to hold a bit

Dewalt 18v Battery Hammer Drill...

Charger light blinks rapidly for dewalt charger?

Dewalt Drills

Top Dewalt Drills Experts

Cindy Wells

Level 3 Expert

6688 Answers

Brad Brown

Level 3 Expert

19187 Answers

Sean Wright
Sean Wright

Level 3 Expert

2045 Answers

Are you a Dewalt Drill Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...