How do you DRY with the Haier washer/dryer

this could possibly help....

https://www.youtube.com/watch?v=D2jYHVzu0Sg

Two possible causes. Try cleaning the fabric softener residue off of the temperature/moisture sensor. The other cause could be the thermostat has failed.

Look up the mfg website and see if they have a troubleshooting page or a support group. It may still be a warranty item check that as well

Could be the circuit board at fault

download the owner manual from www.fitness.manualsonline.com
give the model, mark,etc

and read very well the operation procedure.
God bless you

Look fot a blockage in the filter

I am having the same problem on a WD9900A. The wash cycle works great. Spins fast and clothes are completely rung out. Dryer cycle heats up well. Fluffs and heats cloths. At some point during dry cycle water is injected on clothes and they end up sopping wet; much wetter than after wash. Filter is clear. Outlet pipe clear and functions well. Possible problem with dryer timer? Or washer timing kicking back on?

EC4 The temperature of air vent
Within 30 minutes of dry cycle there is 5 minutes in which the temperature is not increasing.

You need to call for repairs. Probably the heating element is faulty.

You can create a custom program without a dry cycle and hang dry your clothing.

my washer works fine but the dryer wont heat up or dry the clothes it goes onto dry but all the clothes are still coming out wet and the drum is cold

Suggestion: Switch off wall plug and restart to dry.