I have just got a secondhand technika dab fm radio alarm clock with docking for i-pod model no DAB 407 but with no instructions

nothing exists on that model. There is some basic help here

https://www.fixya.com/support/t13488651-bush_ne_2105_dab_clock_radio_ipod_dock

The Bush website thinks it might be this one?

https://bush-support.com/7316876-bush-wireless-charging-dab-clock-radio

and this Bush Clock Radio will be similar as regards setting.

https://documents.4rgos.it/v1/static/9145753_R_D001

..

Afraid I have the same problem and I have to manually set.

good luck !

Hello
Try these links.

http://www.dataentryjobs.us/67948.html
www.worlddab.org/products_manufacturers/technology/dab?pdf=1
www.digitalradioaustralia.com.au/files/...Radio/.../Reciever_Guide.pdf

To set alarm mode :- press Alarm 1 or 2 briefly to swtich between choices of Alarm On-Beep / DAB / FM / Off, keep pressing this alarm button until you get to the mode you want then stop pressing and leave to settle.
To set time: Press and HOLD Alarm 1 or 2 to change time. Minutes will flash first, use dial to change numbers, when you've got to the number you want press jog/select to change hour, use dial to change hour number. If you just leave it alone once you've reached the hour you want it will set where you left it, but...
If you want to specify preset channel/volume/beep tone etc keep pressing jog/preset after setting hour and use dial to set your preferences.

Possible shorted power supply capacitor or bad diode.

Rod

I HAS SAME PROBLEM BUT FOUND THE ANSWER. PRESS STANDBY AND TURN UNIT ON, THEN PRESS ALARM BUTTON, DISPLAY SHOWS ALARM 1, PRESS SELECT BUTTON DISPLAY SHOWS FM/DAB/BUZZ, PRESS LEFT/RIGHT BUTTONS TO SWITCH BETWEEN WAKE UP OPTIONS, THEN PRESS SELECT AGAIN, DISPLAY SHOWS OFF, PRESS LEFT/RIGHT BUTTON TO TOGGLE BETWEEN ON/OFF LEAVE 'ON' SHOWING, PRESS SELECT AGAIN DISPLAY WILL SHOW ALARM TIME, USE LEFT/RIGHT TO SET HOUR THEN PRERSS SELECT, USE LEFT/RIGHT TO SET MINUTES TEHM PRESS SELECT AGAIN, DISPLAY WILL NOW SHOW SMALL ALARM CLOCK IN DISPLAY WINDOW, THIS MEANS ALARM IS NOW SET.

I am finding difficulty to set the clock on Proline dab 100 fm

Hello All,
I have an Alba PD2 DAB radio and have set the alarm to come on with the radio. The problem is it comes on at a very loud level. Is there a way to set it at a lower level ??

Dab Des

Please download required Instruction Manual from HERE.

I have this radio too and from what I have read in a review on amazon suggests alarm does not tune to DAB only FM - very annoying! Contacted Goodman customer care and they suggested it was a problem with a component but maybe it is just the design.