Hi
I have a kenmore microwave and I can not remove it from the cabinet it is installed. I have removed the screws at the top (2 of them) and the faceplate witht the light in it and I still can not get it to come out. It is looser but I can not find any more screws to remove.... PLEASE HELP!!!
My microwave is all torn apart :o(
The top vent exhaust grill has two screws facing down-remove these. remove plastic vent. inside you will see a solid wire tringle assy. turn and pull this release.
warning if you have granite counters or tile, place plenty of material under it to stop the impact if oven gets away from you
-.htm
-.htmYou can probably find exploded views and order parts by entering your model
number here at the Sears
parts site.
A full Sears/Kenmore model number usually has 3 digits, a dot, then 8 more
digits, such as ###.########
A free manual may be available for download. Look for a Manage My Home link button on the right side of the search result / part listing page.
If that link is not there, you will need to order the installation instructions from them.
-.htmWe're happy to help and we appreciate your
thoughtful rating of our answer.
IF IT IS AN OVER THE RANGE MICROWAVE, THERE ARE MOST LIKELY TWO BOLTS LOCATED UP IN THE CABINET OVER IT. ONE IN EACH FRONT CORNER. SUPPORT THE MICROWAVE AND REMOVE THOSE TWO SCREWS. THE MICROWAVE IS HINGED ON A PLATE MOUNTED TO THE WALL. ONCE IT IS DROPPED FORWARD, LIFT IT OFF OF THE WALL PLATE AND SET IT ON A SUPPORTIVE SURFACE.
We had a microwave of similar vintage -- 665.68601890 -- and it did not have the wire pull, although the owner's manual said it would. There were two protrusions near the upper corners of the mounting plate that fit into holes in the microwave. We pulled down on the front top edge, using the bottom back edge as hinge with just enough force to pop the microwave off the protrusions, then could lift it off the back lip of the mounting plate.
2,853 views
Usually answered in minutes!
I took the two screws out of the top, still won't come out. It's a wall venting unit.
Kenmore microwave, cannot get out of space. Took out the two screws in a wall vented unit. Still won't come out
×