How do we charge the Spynet watch from Jakks pacific?

If your watch has micro usb socket that regular micro USB cable and phone charger will work

All you need is a mini-USB to USB cable. Then use your laptop or any open USB port to charge.

Apres avoir telecharge adobe air (bouton rouge sur le site de spynethq.com allez ici http://www.spynethq.com/AIR/fr/SpyApp.air.zip Annonces Gratuites de Cours Particuliers

get ur USB and plug it up to the computer and and then plug it up to ur watch, and the computer has to be on, so play on the computer for a while and then it should be charged if not then u should return it or buy a new one.

go to spynethq.com

Hi there we had to take back his first spynet watch because the speaker decided not to work then we took back a second spynet watch because it would work when it felt like it...our son really liked it too, however after the second watch we didn't wan't to keep having problems so he decided to buy something else...gave up trying to get on their website because it kept freezing and couldn't download spy missions so we had nothing but problems with it ...hope that helps

Make sure the plastic tab is completely removed from under the store battery pack. My tab broke and we had to take the watch apart to remove it. Once we did this, the watch worked.

Hope this helps.

A bit late to the party, but two things come to mind. If the watch is new old stock with a few years on it, more than likely the battery is bad, it won't charge any more. Also, the power supply may be bad, I use 5 volt one amp charger, also, the manual says to charge it with the screen on, I tried that, and the battery will never be fully charged because the screen being on drains the battery faster than the charger can charge it.If the watch is working but the battery is low, connect the charge cable to the watch, then to the charger, otherwise the charger will pull the battery down too. So, let the screen go blank, then charge it, I have tried this method multiple times, and every time, assuming the battery is good, it fully charges in few hours. If you are adventurous, you can upgrade the battery to 450mah, it's a little bigger than the one it comes with, but lasts a lot longer, only a small amount of modification to the plastic strips made into the watch back need to be done, simply remove the strip closest to the electronics and it will fit just fine.

Hello, Pdschanz -

Since the watch was a Christmas gift, it is probably still under warranty.

I hope you found and downloaded the instructions for the watch, saved them in a Documents file with a file name you can find again easily, printed the instructions, and read them thoroughly all the way.

If you have not yet contacted Customer Service for the watch, I suggest you do that after reading through the instructions and the FAQs near the end of the instructions.

This is the telephone number for Customer Service for Jakks Pacific Inc., manufacturer of the watch:
877-875-2557
Malibu, California
Call weekdays during normal office hours, Pacific Time zone.

This is the email address for Jakks Pacific Customer Service:
[email protected]

Source of information:
Instructions for Spynet Video Watch with Night Vision
http://www.spynethq.com/core/pdfs/instructions/Video_Watch_with_Night_Vision.pdf

Best wishes.

The external battery pack supplied in the box with the watch works in "Try Me Mode". There is a reset button on the back of the watch. Reset the unit and the USB port will work. I have two units that had exactly the same problem. Both are charging now!