Plantronics 330 unable to get the bluetooth in discovery mode

You want to make sure that there is no other bluetooth interference on your phone and follow the instructions on the link for the Plantronics Discovery 925 (see page 4).

Good luck from Headsets Direct!

Make the Plantronics discoverable (put it into "pairing mode")
Master instructions at http://plantronics.custhelp.com/cgi-bin/plantronics.cfg/php/enduser/std_adp.php?p_faqid=17509&p_sid=EEbxMesk&p_lva=8271
For the 330,

1. Start with your headset powered off.
2. Press and hold the call control/power button for 5 or 6 seconds until the light starts flashing an alternating red-blue (the Discovery 975 flashes an alternating red-white).
3. Release the button and set the headset aside.

Now you are in PAIRING MODE.
On the iPhone, Go to
SETTINGS GENERAL BLUETOOTH
And then look in the DEVICES list for the device, which should include the model number.
Touch the device
Pairing should be automatic at that point. If you need a passcode, it is 0000.

When joining (or pairing) a Plantronics bluetooth headset to another device a lot depends on the other device. Assuming that you know the necessary steps of your phone or PC for connecting a bluetooth device, all Plantronics headsets pretty much follow a set pairing procedure for connectivity. This one is for the Discovery 975:

1 Turn on the Bluetooth feature on your phone.
2 Turn the earpiece on. Press and hold the call control button until the indicator flashes red/white.
3 Use the commands on your phone to locate and select your earpiece. 9xx Plantronics.
4 If prompted for the PIN code or Passkey, enter 0000.

Pairing is successful when the indicator on your earpiece flashes white.

Note If your phone supports Secure Simple Pairing (SSP), you will not need to enter a PIN code or Passkey.

Good luck from Headsets Direct!

When joining (or pairing) a Plantronics bluetooth headset to another device a lot depends on the other device. Assuming that you know the necessary steps of your phone or PC for connecting a bluetooth device, all Plantronics headsets pretty much follow a set pairing procedure for connectivity. This one is for the Discovery 975:

1 Turn on the Bluetooth feature on your phone.
2 Turn the earpiece on. Press and hold the call control button until the indicator flashes red/white.
3 Use the commands on your phone to locate and select your earpiece. 9xx Plantronics.
4 If prompted for the PIN code or Passkey, enter 0000.

Pairing is successful when the indicator on your earpiece flashes white.

Note If your phone supports Secure Simple Pairing (SSP), you will not need to enter a PIN code or Passkey.

Good luck from Headsets Direct!

Once you make your LG Lotus discoverable, then put the Plantronics Discovery 925 into pairing mode by holding the call control button until the headset flashes red and blue. Here is the link below for the Discovery 925 pairing instructions.

Plantronics Discovery Pairing Instructions

Good luck from Headsets Direct!

The user manual is here http://www.plantronics.com/media/media_resources/literature/user_guides/explorer320_userguide_en.pdf
Press the button for at least 3 secs to getinto discovery mode Pairing and connecting Please note: You can only enter pairing mode from off position. Bluetooth® device must be in discoverable mode. Light Indicator flashes blue and red

When joining (or pairing) a Plantronics bluetooth headset to another device a lot depends on the other device. Assuming that you know the necessary steps of your phone or PC for connecting a bluetooth device, all Plantronics headsets pretty much follow a set pairing procedure for connectivity. This one is for the Discovery 975:

1 Turn on the Bluetooth feature on your phone.
2 Turn the earpiece on. Press and hold the call control button until the indicator flashes red/white.
3 Use the commands on your phone to locate and select your earpiece. 9xx Plantronics.
4 If prompted for the PIN code or Passkey, enter 0000.

Pairing is successful when the indicator on your earpiece flashes white.

Note If your phone supports Secure Simple Pairing (SSP), you will not need to enter a PIN code or Passkey.

Good luck from Headsets Direct!

When joining (or pairing) a Plantronics bluetooth headset to another device a lot depends on the other device. Assuming that you know the necessary steps of your phone or PC for connecting a bluetooth device, all Plantronics headsets pretty much follow a set pairing procedure for connectivity. This one is for the Discovery 975:

1 Turn on the Bluetooth feature on your phone.
2 Turn the earpiece on. Press and hold the call control button until the indicator flashes red/white.
3 Use the commands on your phone to locate and select your earpiece. 9xx Plantronics.
4 If prompted for the PIN code or Passkey, enter 0000.

Pairing is successful when the indicator on your earpiece flashes white.

Note If your phone supports Secure Simple Pairing (SSP), you will not need to enter a PIN code or Passkey.

Good luck from Headsets Direct!

When joining (or pairing) a Plantronics bluetooth headset to another device a lot depends on the other device. Assuming that you know the necessary steps of your phone or PC for connecting a bluetooth device, all Plantronics headsets pretty much follow a set pairing procedure for connectivity. This one is for the Discovery 975:

1 Turn on the Bluetooth feature on your phone.
2 Turn the earpiece on. Press and hold the call control button until the indicator flashes red/white.
3 Use the commands on your phone to locate and select your earpiece. 9xx Plantronics.
4 If prompted for the PIN code or Passkey, enter 0000.

Pairing is successful when the indicator on your earpiece flashes white.

Note If your phone supports Secure Simple Pairing (SSP), you will not need to enter a PIN code or Passkey.

Good luck from Headsets Direct!

I got a plantronics discovery 610 but I'm unable to pair it with my phone motorola rizor