How do i get a manual configuration for GPRS setting for my htc hd2 phone?

Get the network unlock code and the easy to follow unlock instructions at

Unlock T Mobile USA HTC HD2

hi,
there are two ways of the getting these settings one is automatic while the other one is manually.
In first option you have to contact the your network operator and ask them to send you the settings of the GPRS and MMS. You will receive the settings via SMS. After receiving the settings install the same and restart the cell.
In second option also you have to contact to the your network opertor and ask them to manual procedure of GPRS and MMS configuration. Then follow the procedure...
You can also search in google as GPRS settings for "your network operator's name" follow the steps mentioned there in.... but it is advisable that the you first opt for the option one or two..
Hope this has helped you... Thanks

clear the IP address and port setting. Then try again

You need to activate GPRS service on your sim because your phone is GPRS ready. To do this you need to call the customer care number and ask them to activate gprs on your number. Also ask them to give the configuration settings of your model that will automatically configure your mobile to use GPRS.

You can configure email on HTC to get your corporate emails. You will need your emailaddress, password to logon, smtp and pop3 settings. Unfortunately flash video is not supported in the default browser. You need to install Skyfire to watch flash video on your HTC HD2.

All phones need APN setting to make them work for gprs or data functions.
You can find the settings from your network operator and then you can follow this video guide on how to enter APN settings in any HTC phone.
This is a tutorial on how to add APN settings to HTC phones for your network providers. Example phone used is a HTC Hero but process is same for all HTC models.
APN and Data Settings Change for HTC Phones

1. Go to settings -> wireless controls
2. Go to Mobile Networks -> Access Point Names
3. Click Menu and select New APN
4. All you need to add for most networks is just the APN setting which can be obtained from your simcards network provider
5. Press Menu and Save
6. You are ready and have configured data connection settings.

Enjoy your HTC phones unlocked for Voice and Data for any network. see video below

please contact Airtel customer care and get the airtel GPRS settings. by automatically or Manually configure it.

regards
Ram

After browsing a lot of sites and experimenting with the settings finally I was able to configure my HTC P3400i with Vodafone Live support without any help from the Vodafone customer care (who were very bad and rude when I called them for getting the setting). The settings is working fine for me in Bangalore. Hope this helps all who bought this phone and struggling for getting the GPRS setting for HTC P3400i.

Below is the step by step instruction:
Step 1
Start->Settings->Connections->Tasks->Add a new modem connection:

Enter a name for the connection:
<give any name>

Select a modem:
Cellular Line(GPRS)

click next

Acess point name:
portalnmms

User name: <blank>
Password: <blank>
Domain:* <blank>

Go to Advanced->TCP/IP
select radio button "Use server-assigned IP address"

Go to Advanced->Servers
select radio buttion "Use server-assigned address"


Step 2
Start->Settings->Connections->Tasks->add proxy setting

Select "This network connects to the Internet"
Select "This network uses a proxy server to connect to the Internet"

Click "Advanced" button
Tap on HTTP
Server: 10.10.1.100 Port:9401

Username: <blank>
Password: <blank>
Domain: <blank>

Tap on WAP
Server: 10.10.1.100 Port:9401

Username: <blank>
Password: <blank>
Domain: <blank>

Step3:
Start->Settings->Connections->Advanced
In "Select which networks are automatically used"-> click the Select Networks
Programs that automatically connect to the Internet should connect using:
Select the Connection name which you configured in Step 1

Programs that automatically connect to a private network should connect using:
Select the Connection name which you configured in Step 1

Make sure you reboot after doing above change.