Insignia NS- 27" TV27 TV Logo

Related Topics:

Posted on Jan 04, 2011

MY HDMI INPUT WILL NOT WORK ON THE INSIGNIA NS-27LCD! i PLUGED IN THE DVD PLAYER WITH HDMI CABLE AND GO TO THE HDMI INPUT AND IT SAYS NO SIGNAL! WHY?

5 Related Answers

Anonymous

  • 265 Answers
  • Posted on May 29, 2008

SOURCE: Insignia portable dvd NS Pdvd8 need battery

Hey redhouse2,

Because Insignia® is a brand primarily carried by Best Buy™ stores, there are two basic ways that you should be able to obtain a replacement battery: by contacting Insignia® technical support, or by ordering a replacement through Best Buy Partsearch.

You may always reach Insignia® by calling their toll-free hotline at (877)-467-4289. If you would prefer a self-service option, simply visit the www.Bestbuy.com website, and follow the link at the bottom of the page that says "Order Parts." Additionally, you may always contact a Partsearch agent by calling our toll-free hotline at 888-Best-Buy (888-237-8289), and requesting to speak with a parts specialist.

Please keep in mind that while some third-party companies may carry compatible batteries for this model, if your DVD player is still under the manufacturer's warranty (or a Best Buy Performance Service Plan) you may wish to seek the replacement part through Insignia® or Best Buy™ first to avoid any unnecessary charges.

Hope this helps you out.

Sincerely,
Aaron
Go Ahead. Use Us.

Ad

Anonymous

  • 230 Answers
  • Posted on Jul 24, 2008

SOURCE: TV / DVD problem

did you try menu: video input 1 or front?.....

Anonymous

  • 1 Answer
  • Posted on Jul 24, 2008

SOURCE: Insignia NS DVD 1A

i have just purchased the ns-dvd1-a player and am having the same problem as above. i have a bunch of DVDs from India and have to return the player to best buy if i can't unlock it. Pls send the unlock code. Note: 9735 not working anymore.

Anonymous

  • 98 Answers
  • Posted on Nov 07, 2008

SOURCE: portable dvd player insignia ns-pdvd10 screen problem

Check the screen switch on the right top side where the door closes there is a little circle and the release switch usually gets jammed (this is a common defect) you will need a small thin flat head screwdriver to pry out the switch.

Anonymous

  • 814 Answers
  • Posted on May 23, 2009

SOURCE: Insignia 27" lcd tv vertical colored lines across screen.

This television, appears to have had a failure in the mainboard. This is the board that controls the video functions and sound functions. The unit should be taken or sent in to a service center for testing and servicing. The service center will have all the correct service information to determine the problem for you. You can call Insignia customer support at this telephone number 1-877-467-4289. You can also got to the customer support website at www.insignia-products.com. Go to the support section and ask them for help on how to get service for your television. I hope this information helps you with your problem.

Ad

Add Your Answer

×

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

0helpful
1answer

I have a Insignia Plasma tv model NS-42P650A11 it is not getting any channels now. Worked then the other day it stopped having any channels, I've unhooked everything for awhile then rehooked everything...

First, I'm not a Insignia representative.
* Check your warranty. call for support.

*** Following for information only.***
* No signal means no usable signal for a specific input on the TV or monitor. Check your cable box. Contact your cable service provider.
* If it's just a monitor and not a multi-function TV that also has a Computer to video input then you need to check the device that's hooked up to the monitor as single function monitor's usually only have one input.
* If this is a TV then you need to go to the TV menu and check the "Input Source" to make sure it's on the input plug your using. (I'm using HDMi-2 on my laptop to TV)
* If it's not on the correct input then there will be a different signal (DVD, VCR, etc.) or none at all (No Signal) if those units are turned off.
* Unplug all devices (to reset) and count to 10. Power up and perform set up to your existing configuration.
* Note; as of Jan 2018 most cable TV are not broadcasting in analog (chan 3) and must use a digital tuner to get signal. Some cable Co. provide converters (for a fee?)
* Check with your service provider for more information.
Aloha, ukeboy57

PS, If you do have a damaged input (or feed) then check your video device for alternative outputs; IE: RCA Vid-Right-Left audio, HDMI, Split video (Y-G-B), VGA, S-plug, etc.

* This your model?; https://www.cnet.com/products/insignia-ns-42p650a11/specs/
* I notice there is no cable input. Try switching to another of inputs;
2 x HDMI input - rear
Composite video input - rear
S-Video input - rear
2 x component video input - rear
Audio line-out
VGA input - rear
2 x audio line-in - rear
Digital audio output (optical)
0helpful
1answer

Sony KDL-40NX711 HDMI PORTS STOPPED WORKING. EVERYTHING ELSE WORKS FINE. WHAT WOULD CAUSE THIS TO HAPPEN?

Sounds like everything works. Your remote has an input menu. Have you cycled it around to the right component? i.e. HDMI1 or HDMI2, or DVD, even PC?
If not, try that.
0helpful
1answer

Insignia Ns-15MS0832 How do I in large the TV picture when using HDMI

Hi, On your remote select menu in the list should be something called (aspect ratio) 4:3 , Zoom, Full , 16:9 etc.. These settings should make the screen larger or smaller. Also in the list should be something called HDMI for source connections (DVD, Cable box, Dish) etc. You should be using HDMI cables for these for better quality signal. Good luck.
0helpful
1answer

I continue to have to switch my HDMI cable between 2 ports on my TV because initally there is "no signal". But when I switch ports I get a signal. So is this a HDMI cable issue, port issue or my Insignia...

My best bet would be a port issue - see if another device will work plugged into that port. (Some HDTVs have a HDMI port strictly for Service and nothing else but a Technicians specified cable will work in this port, look at the Manual) Check to see if your TV is set to the same port as your connecting to. One will be HDMI 1, next HDMI 2 and so on, the input button on remote should switch from port to port, make sure port setting on TV is same as #port your connected to.
0helpful
1answer

I have Insignia ns-p42q-10a tv, there is a loud hum when the volume is on when you mute the volume it goes away? Any suggestions?

check other inputs AVI, HDMI,,

do you here the hum on all inputs?

The hum maybe from a bad ground loop,, unplug all pluged in inputs, [dvd,games,radio,ect] <--check for hum.

If the hum is gone, plug inputs back in one at a time and test,,

When you find the source of the hum, go get a ground loop isolator to fix.
0helpful
1answer

Does the Insignia ns-2brdvd digital opt. output work with HDMI

Below is what your manual says abour it. From hardware perspective, when you have a disc in there the optical audio driver is active and so is the HDMI audio. To verify, lift the lid on the optical interface and you will see a red or blue light on the inside. Don't look directly at it! View from the side.Plug that into your home theater system, select that input on your home theater and you should be good to go.


Insignia NS-BRDVD Blu-ray Disc Player
www.insignia-products.com
Connecting a digital audio optical system
To connect a digital audio optical system:
1Make sure that your player and the TV are
turned off.
2Connect one end of a digital audio optical
cable (not provided) to the DIGITAL OUT
(PCM/BITSTREAM) OPTICAL jack on the
back of your player.
3Connect the other end of the cable to the
DIGITAL AUDIO OPTICAL INPUT jack on
the digital audio system.
0helpful
1answer

SERVICE CODE

I have a 26" Insignia HD-TV and just found out the cable remote code (to connect TV with the cable box) is 0463.  If that's not what you need, try calling Insignia's help line at 877-467-4289
Not finding what you are looking for?

213 views

Ask a Question

Usually answered in minutes!

Top Insignia Televison & Video Experts

Grand Canyon Tech
Grand Canyon Tech

Level 3 Expert

3867 Answers

Cindy Wells

Level 3 Expert

6688 Answers

matt martin
matt martin

Level 3 Expert

1259 Answers

Are you an Insignia Televison and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...