I am looking for replacement cables for my MS 3200 Home Gym. I need the back cable that goes to the leg raise/ shoulder butterfly area and has two lower pulleys on the lower part of the back side of the machine.

The single-station Weider 8525 home gym features a full range of attachments for duplicating almost any exercise you'd perform on a gym machine. You adjust resistance for each exercise by sliding a selector pin into a stack of weight plates. But the disadvantage of having so many features and possible exercises packed into a single workout station is that you might have to make a few mechanical adjustments as you transition between exercises.

1. Leg Exercises
The 8525 has a leg lever, attached to the front of the seat, which you can use for doing leg curls and leg extensions. These classic gym exercises isolate your hamstrings and quads respectively. The Weider 8525 doesn't have the leg press platform or squat lever you'll find on some home gyms, but if you remove the seat, preacher pad and leg lever you can use the low pulley for doing squats.

2. Chest Exercises
The Weider 8525 has two major attachments for working your chest: A press arm for doing chest presses, and butterfly arms for doing pec flyes. You can also use the high and low pulley stations for doing incline or decline single-arm chest presses.

3. Back Exercises and Pulleys
The Weider 8525 has a lat tower and high pulley for doing lat pulldowns. You can also use the tower and pulley for high rows. The low pulley is ideal for a variety of back exercises including more row variations, Romanian deadlifts, shrugs and upright rows. In fact, the ability to attach different handles allows you to adapt both pulleys to work for almost any major muscle group in your body. However, the Weider 8525 lacks a mid-level pulley that would make this equipment even more versatile.

4. Arm Exercises
The Weider 8525 home gym has an angled preacher pad to support your elbows as you do preacher curls -- but you need free weights to provide resistance during the curls. You can use the 8525's resistance if you remove the seat, preacher pad and leg lever -- and use the low pulley for doing biceps curls. Your triceps work during chest presses, but you can also isolate them with a variety of pushdown exercises using the high pulley.

call the manufacturer for a replacement
find a cable , chain or lifting apparatus shop in your area and using the broken cable as a sample have a new one made

try going to a good hardware stop and buying a length of stainless steel cable and a couple of cable clamps and cable inserts ( eye rings )
take a measurement of the length of cable needed and allow for the extra for the looping and clamping
measure the diameter and that will be as good as the bought one

please give me a back side photo of multi sports ms 3200 homegym

Ebay has many sellers that have cables for multigyms to order online, so long as they fit the gym you have, which they should as they can't be too different, but your best bet is to check Ebay, they might even have the specific cables you need.

hi there i have a instuctions book for a delta orion multigym with a pic of pully and cables if you still looking drop me a line at [email protected] and i'll email you a copy of the layout
matt

There is really no easy way, there is only one way as with bolts and removing the cables. I would recommend taking a lot of digital photos of the GYM so you will know what its supposed to look like when putting back togethere. You can also mark the bolts and around area they go in with a marker (use different colors) before you remove them, will aid in reassembly if your not too mechanically inclined.

about every month, i spray the pulleys with WD-40 and then spary it into a cloth that I use to wipe the cable covering...my gym is 4 yrs old, sits out on my covered back porch and the cables and pulleys are like new

Cruise control and throttle pedal go to a butterfly aperature on throttle body.  Look in the engine compartment and while someone pushs on gas pedal.   Look at the area where the cable comes out and goes around a semicircular widget (throttle body butterfly).  Cruise control has another cable that joins this same plate. Check for slack in cable, clear cable path,  and look for anything in that area that might be broken or routed wrong.  
good luck