Question about LG DU-42PX12XC 42 in. Plasma HDTV

1 Answer

Red stripe down the left side about 1 inch thick.

Posted by on

Ad

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Expert
  • 264 Answers

This is a problem with your control board. For some reason, the resistors on this board become "Un-Soldered" I'm not sure how handy you are but this can be fixed. BE SURE TO EITHER DISCHARGE THE CAPACITORS, OR AVOID THEM ALL TOGETHER (Capacitors look like little cans.They have what looks like an "X" or a "+" on the top.) Capacitors can hold a charge for a long period of time. Here is a link on how to fix this issue. I hope this helps you.
http://greenrenovation.wordpress.com/du-42px12x-red-stripe-repair/

Posted on Jan 03, 2011

Ad

1 Suggested Answer

6ya6ya

6ya staff

  • 2 Answers

SOURCE:

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How do I repair a thick black line going down the page?


Hi Ydn2,
You need to say what type of machine, what colour, what conditions. etc,etc.
Good luck.

Feb 26, 2015 | Xerox Phaser Office Equipment & Supplies

1 Answer

When I print a color page, there is a multi colored line about a 1/2 inch thick along the left side of the paper. The print quality is good for everything on the page, just this line of swirled colors. ...


Run the Print Quality test. Sounds like one of the color cartridges is bad.
Also run the Disable Cartridge test. That will let you test each cartridge by itself.

Before you do that, open the front door halfway. Now you can see each of the color drums in each cartridge. One of them may have a 1/2" stripe on the drum on the left side.

Nov 29, 2010 | HP Color LaserJet 3500 Printer

1 Answer

For the Clarion DXZ945MP CD Player for car audio, I do not know the the wire harness color wire diagram? The wiring harness on my Monte Carlo 2000 reads what color wire goes to what, on the side of the...


3amp yellow battery for deck
15 amp yellow is another battery wire
purple right rear + speaker
purple/black right rear -
green left rear +
green/black left rear -
white fr left +
white/black fr left -
grey fr right +
grey/black fr right -
blue auto antenna
blue/white rem amp
brown phone mute
orange/white illumination
red accessory

hope this helps
pls rate cause people arnt rating

Nov 05, 2009 | Clarion DXZ945MP CD Player

1 Answer

42" Panasonic Plasma - Vertical red stripe 6" from left side


We originally had a red stripe roughly 3" wide running vertically on the ride edge area of our Panasonic 52" Viera plasma tv. It has now been joined by a solid black stripe of the same width running from the top to the bottom. Living in Germany and purchased at local PX long enough ago that the warranty is likely expired. Now what?

Jan 18, 2009 | Panasonic TH-42PD50U 42 in. Plasma EDTV

1 Answer

42 LG Plasma


It can be fixed but about $300 in parts.

May 18, 2008 | LG 50PX4DR 50 in. Plasma TV

1 Answer

Grey stripes down the left and right side


TACK IT OUT OF 1080I CHANG YOUR FORMAT ON YOUR TV
READ YOUR MANUAL WILL HELP YOU OUT.
THIS SHOUD HELP YOU OUT.

Dec 17, 2007 | RCA D52W19 52" Rear Projection Television

1 Answer

Samsung CLP-510 Print Quality problem


The following can cause bands (vertical on a normal page)


Faulty Toner cartridge
Faulty Drum Unit
Faulty Transfer Belt
Contaminated Fuser
Damaged or dirty LSU glass

I've also seen this sort of thing caused by a crusty build-up of toner on a wiiper blade on the Transfer Belt, and or Drum.

Dec 01, 2007 | Samsung CLP-510 Laser Printer

1 Answer

Thick multicoloured stripes accross the screen


Some condesator gone bad.. remote control IR eye needs 5V voltage but now it's not there so i think you need to replace bad condesator.

May 30, 2007 | ViewSonic N3000W 30 in. HD-Ready LCD...

Not finding what you are looking for?
LG DU-42PX12XC 42 in. Plasma HDTV Logo

Related Topics:

135 people viewed this question

Ask a Question

Usually answered in minutes!

Top LG Televison & Video Experts

Ekse

Level 3 Expert

13434 Answers

The Knight
The Knight

Level 3 Expert

76140 Answers

RONALD CARTER JR

Level 3 Expert

438 Answers

Are you a LG Televison and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...