Error code 71
Print Unable 71
Turn the power off and then back on again.
Polygon motor failure
The problem is in the scanner motor.To cancel the trouble status follows these steps:
STEP1 .Press MENU
*,2,8,6,4
STEP2.The machine beeps for approx.
one second and displays "MAINTENANCE" on the
LCD, indicating that it is placed in
the initial stage of the maintenance mode, a mode in which
the machine is ready to accept entry
from the keys.
STEP3.Now you are inside the
simulation Press 01 to reset the
trouble status.
STEP4.To exit the simulation press 99
• Pressing the 9 key twice
in the initial stage of the maintenance mode makes the machine
exit from
the maintenance mode, restoring it to the standby state.
• Pressing the Stop button
after entering only one digit restores the machine to the initial
stage of
the maintenance mode.
I hope that this will cancel the error but if not canceled you should call the authorized serviceman to fix your machine.
SOURCE: unable print copy 71
Sir/Madam
The machine has a mechanical problem.
Turn the power switch off, wait a few minutes, and then turn it on again. If the problem continues, please call your dealer or
Or Follow Us For Online Brother Printer Support
I recommend that you will post your question under
the correct category (printers) and maybe add more details to it, so it will
be easier for Experts to understand the question and answer it.
You can also contact the Brother site directly at http://www.brother-usa.com/askus/default.aspx?PGID=1&R3ModelID=1814#.UIU9F6Puj_Y
6,947 views
Usually answered in minutes!
×