Please help! I lost the manual and i don't know how am i able to set the time, date and day of the week of my armitron watch 456999 red? thank you!

To set the date and day on your Armitron 20/4591TT watch, follow these steps:

1. Press and hold the mode button until the display starts flashing.
2. Use the hour and minute buttons to set the current time.
3. Press and release the mode button to move to the date setting.
4. Use the hour and minute buttons to set the current date.
5. Press and release the mode button to move to the day setting.
6. Use the hour and minute buttons to set the current day of the week.
7. Press and release the mode button to exit the setting mode.

If you are having difficulty setting the date and day on your watch, you may want to consult the owner's manual for additional instructions.

click this link scroll down to find your watch then download the manual
http://www.armitron.com/watch_instructions.asp

Hello,

You can find Armitron Watch Instructions at the Armitron website. I've included a link below for your convenience.

http://www.armitron.com/watch_instructions.asp

I hope this helps. Please let me know if I can be of further assistance to you.

--Sandy

Please be sure to Rate this message! Thanks!

Check out my tips and tricks. There you will find direct link for all Armitron watch manuals.

Hi wsclwbbt71,

To set the time and date of your Armitron watch, please follow the steps below.

1. Press the MODE button once. This will put you in the timer.

2. Press and hold down the MODE button. This will put you in the alarm set display.

3. Press the MODE button once more and it will put you in the time set display.

4. Use the ST/SP button to change the blinking portion of the time. Then use RESET button to move you thru the different parts of the time/date.

Hope it helps.

Thank you for using FixYa.

Hi an_stocker0,
There is two pulls to set the time and date .First pull is for the day / date wind it in order to choose the right date number and second pull is for the time wind it until the desired time comes out. For better understanding follow this link for more information and instructions below. Feel free to ask whatever the results.
http://www.armitron.com/docs/Automatic%20Manual.pdf
Hope its may helps;
Regards, VOTIT

Hi,

This is direct link to all ARMITRON watch manuals/instructions: http://www.armitron.com/watch_instructions.asp

or

You can also try with this approach. This is for Armitron WR 330,but i believe this could also help you.

The following labels are on the inner ring of the watch; I've given their positions relative to where numbers would be on the face of an analog watch.
"ST/STP" is at 2:00; "EL" is at 4:00; "MODE" is at 8:00; and "ADJ" is at 10:00.
To set the time, date, and day of week:
Press and hold in the "MODE" button until the display starts flashing. (This is the alarm time.)
Press the "MODE" button again; the seconds begin flashing. Press "ADJ" to set them to zero.
Press the ""ST/STP" button to change what you want to set. The options appear in this order each time you press the "ST/STP" button: minutes, hour, month, day, day of week.
Use the "ADJ" button to change the value of the setting.
Touch "MODE" to save the settings and return to time mode.


Thanks for using Fixya. Please rate the solution.

mcdevito75 here, The stem has 2 positions, Carefully slip a fingernail under the stem and lift, it may take a few trys to get used to it, in this first position you should be able to set the DATE very easily and Maybe the DAY of the wwek also, turn the stem 1 way to change the DATE and the other way For the DAY of the week., Let"s figure you can only set the DATE in this first position, First thig to do is set the DAY of the week, go thru the watches 24 hour cycle and set the DAY to 1 DAY before the DAY you need, now in that first position of the stem, set the DATE to 1 DATE before the DATE you need, now in the 2nd position we all know pull the stem out to set the time of day, go thru the 24 hour cycle to bring up the DAY of the week and DATE you need. Now your watch is set and will change on tome at around mid-nite.

You can download the user manual for your watch from this link(http://www.watchesmanuals.com/Armitron/Armitron-Sport-40-8125BLK-Watch.htm)

he following labels are on the inner ring of the watch; I've given their positions relative to where numbers would be on the face of an analog watch. "ST/STP" is at 2:00; "EL" is at 4:00; "MODE" is at 8:00; and "ADJ" is at 10:00.
To set the time, date, and day of week:
Press and hold in the "MODE" button until the display starts flashing. (This is the alarm time.)
Press the "MODE" button again; the seconds begin flashing. Press "ADJ" to set them to zero.
Press the ""ST/STP" button to change what you want to set. The options appear in this order each time you press the "ST/STP" button: minutes, hour, month, day, day of week.
Use the "ADJ" button to change the value of the setting.
Touch "MODE" to save the settings and return to time mode.
The website listed below has many instruction sheets, but does NOT have instructions for this watch as of 25 December 2008.
Check:
http://www.armitron.com/WatchInstructions.html