Xbox 360 guitar hero no sound controller 2

Unfortunately, Guitar Hero 3 does not support drums. World Tour is the first game in the series to support them. In addition, if they aren't official Guitar Hero drums, they aren't guaranteed to work with World Tour. Hopefully they do work. Good luck!

Wireless guitar may have been damaged and if so you might have to buy a new controler for guitar hero . Its not the xbox 360 its the Wireless guitar the If sensor is either broken of a loose wire inside the guitar is causing the problem . If the problem persist do NOT open the guitar go buy a used one from gamestop or online . Amazon has cheap replacements around 10-15$ depending what wireless guitar your buying .

Power on your Xbox console and allow it to load to the Xbox dashboard.

Press the green Xbox controller on the guitar. All four lights surrounding the button should start flashing.

Press the connect button on your Xbox console (It's next to the Memory Card #2 slot).

Press the wireless button on the "Guitar Hero 3" guitar (Look for the on the bottom of the guitar).

Wait for the four lights to stop flashing, with one light becoming a solid green. Your air guitar should now be connected remotely to the Xbox.

make shure your xbox is properly connected to the wall and reconect the guitar to the x box

try readjusting the wires.

No, its a compatibility issue. The XBox has its own system to work.

Is your TV a HD TV? Be sure to go to options and synchronize the game. There are delays with HD TV's and the GH/Rock Band games.

Also, try using a wired guitar to see if there is a problem with the wireless guitar you are using.

Hope this helps!

pmac92,
Did you sync your guitar and drums first? They are just like a normal xbox 360 wireless controller, you need to sync them.
randy320sgi

those guitars are using the same frequency and are canceling one or the other out. plus they are the same brand, i would use the standard wired guitar and one wireless or buy an official wireless guitar. good luck bro! Rock On!

Try setting the sound in options to mono instead of stereo.