Transcend StoreJet 25 M2 500GB not detected in windows7 home premium edition

If it's asking to be formatted you need data recovery help. For remote data recovery and do-it-yourself data recovery see http://FreeDataRecovery.us

Check to see if it shows up in "Disk Management".
Right-click My Computer >> Manage >> Disk Management.

If so, it may need to be formatted.

To format: Right-Click volume, and select format.

Good day..!!Try to check at the disk management,then change drive path or mount,then ist already detected in my computer..thanks

Perhaps you should download updated software of your external hard drive. If still not working maybe your external hard drive is not supported by your OS or isn't compatible with your OS.

If you are using the USB "Y" cable that has two male ends on one side then ditch it and try a regular usb cable. Regular being a cable that is USB to USB mini, one that as short as possible e.g. 36 inches or less. This solution is what solved my problem, so simple :)

If you need further help, I’m available over the phone at https://www.6ya.com/expert/chris_51d7c1b240c21e38

try to format it to other computer. . .


have a nice day

Hi..had the same problem a while back..check out the Transcend site..Think thats where I found a solution

Good Luck.............Pedro

Identical question as: http://www.fixya.com/postanswer.aspx?thid=6765511&prdid=585393&ctgid=0&ref=unsl

Identical question to:

http://www.fixya.com/support/t6765511-laptop_xp_not_detecting_transcend

are you able to see the hd detected in the storage section of the bios setup?

try scanning for new hardware changes in the device manager

else try connecting the hd in some other system and try if it is getting detected in that...