Your headset is a monaural device, and, as such, bears bluetooth profiles HSP (HeadSet Profile) and HFP (HandsFree Profile) only, which are suitable for handling phone calls. The iPod Touch is not a phone, though, for what it must lack those profiles. It does have A2DP (Advanced Audio Distribution Profile) and AVRCP (Audio/Video Remote Control Profile), though, which are meant for stereo music streams. In order to have a bluetooth headset paired with your iPod, you better purchase a stereo pair out there. There are lots of brands and models available.
You know, for some platforms there are some applications which are able to route all audio sources to a monaural bluetooth headset. I don't know if there are any of such softwares in Apple's app market. You could search for it, if you want, but be warned that such arrangements use to result in pretty poor sound quality.
Please, let me know if I can help you any further.
Regards,
Carlos
It will connect with the iPod touch but airplane mode must be off and the em 227 must flash blue and red then on the Bluetooth page in settings it should be there if Bluetooth is on then you select the hands free device and it should ask you to enter a pin the pin will most likely be 0000, 1234, 1111, or 9999 after you get the right pin it should say connected.
Pairing the
Headset with a Sony Playstation3 Entertainment System:
To pair your [EM-227] Bluetooth Headset with the Sony
Playstation3 (PS3), go to the PS3 main menu, scroll to "Settings"
and select.
Scroll to "Accessory Settings" and select.
Scroll to "Manage
Bluetooth Devices" and select.
The menu will ask: "The Bluetooth device has not been
registered. Do you want to register it?"
Select YES.
Put your [EM-227] Bluetooth Headset into discover mode (see
X.XX of this manual for instructions on how to get the headset into discover
mode).
Select "Start
Scanning" from the PS3 menu.
Once the PS3 has discovered the [EM-227] Headset the screen
will read "Select the Bluetooth device
to register".
Select [EM-227].
The PS3 will ask for a passkey. Enter [0000] then press "OK".
Now press O (the PS3
circle button) to get back to the previous menu.
Scroll to "Audio
Device Settings".
Change the "Input
Device" to [EM-227].
Note: "Input Device" is the
microphone, how others will hear you speak.
By default, the "Output
Device" will now switch to [EM-227].
Note: "Output Device" is the
audio, how you will hear the PS3 audio and others speaking.
If you would like to hear the PS3 audio and others speaking
through your TV or Audio System, scroll to "Output Device" and switch to "System
Default Device". If you would like
to hear sound through the [EM-227] headset, then leave the "Output Device" setting on [EM-227].
To test your connection, speak into the headset and you will
see the bars above the "Microphone Level"
moving. If not, repeat the pairing
process.
Press "OK" to
confirm the new settings. You are now ready to use the [EM-227] Bluetooth
Headset with your PS3 Entertainment System.
For further assistance with Bluetooth settings on your PS3 please refer to your PS3 instruction manual.
268 views
Usually answered in minutes!
×