Cannot hook up vizio VSB200 soundbar to LG TV

1. Plug in the power cord.
2. Plug in the optical cable from your TV to your sound bar.
3. Turn on your TV.
4. Turn on your Soundbar.
5. Check the audio on your soundbar and make sure it's set to the right input.

Guide attached:

TV sound bar problem - Audio - Audio - Tom's Guide

www.tomsguide.com/answers/id-1991267/sound-bar-problem.html

Jan 23, 2014 - I recently purchased a Vizio E Series Razor LED 60" tv for my home, and ... The TV plays sound with built in speakers fine, ... on the source playingthrough the tv, if via hdmi, the soundbar would ... Alright I plugged it in but still nosound. ... the tv hooked up yet but my bluray player runs off HDMI and my xbox ...

No Sound Thru Speakers (only sound thru TV) - VUDU Forums

https://forum.vudu.com/showthread.php?...No-Sound...Speakers...sound...

Jun 18, 2011 - 10 posts - ‎8 authors
Just purchased and connected an LG wireless internet-ready TV to a receiver, a DirectTV HD DVR satellite box, and surround sound speakers. ... Cable, Blueray player, and others internet services, like Cinemanow provide ... because i have a Vizio Soundbar 210WS model, and i have to go into the TV ...

http://store.vizio.com/documents/downloads/accessories/VSB200/271User_Manual.pdf

No adapter. Your sound bar has to have wireless built in.

081Try this code.

You need a 1/8" stereo jack to rca....can get on at walmart....hook it from your headphone jack on your pc to the input on the sound bar....input 1 or 2....make sure you have the right iput selected for the sound bar and you should be in business

There are no codes available for a 6.4 remote on a Vizio Soundbar. Below are the steps to Power Scan the remote control. This will search all codes 1 by 1 until it finds a code that works, or exhausts all available codes.


Power Scan:

1.) With the Soundbar on, press and hold the AUX mode button (about six seconds) on top of the remote until all mode button backlights come on, then release.

2.) Press 2 then press STAR (*)

3.) Press the Up arrow button once a second while pointing the remote at the Soundbar. If the code for the Soundbar comes up, it will power off.

4.) Press the POUND (#) button. If the code entered is valid for the remote, the mode light flashes three times. To verify the code works try several different functions for that equipment.

Tommy Faust
DISH Social Media Representative

my soundbar vsb200 no sound at all what im i doing wrong

Hello,
There are a couple ways you can do this.
1-You can take your audio output from the tv and connect it to input 1 on the sound bar. This is what I would recommend.
2-You can unplug the audio portion from the tv and connect it to the sound bar, thus only sending video to the tv and the audio from your source directly to the sound bar.
Good Luck

I had a similar problem. I tried all the TV settings, but still it would not work. I plugged the sound bar directly into the cable box (AT