F11 error code - Maytag EPIC MFW9700S Front Load Washer

Well it is a drain blockage code. Check the pipe. I had a blockage caused by the stalk off an apple and an accumulation of lint!

Miele Dishwasher Error Code = Fault code F11 (Drainage) = Water not draining away. Cause Of Error/Fault Code = Filter combination in the cabinet is blocked.Jun 30, 2016

Miele Dishwasher Error Codes Display & Light Indicator Codes

Videos as well

https://www.google.com/search?q=Miele+dishwasher+shows+code+F11

..

Question edited for clarity.
Question moved from 'Washing Machine' to Gorenge Dishwasher.

F11 - Water Outlet Fault

https://www.google.com/search?q=gorenje+dishwasher+error+code+f11

..

How we solve toshiba washing machine E3 error?

if its a Kenmore model then this message says that the button control board has lost sight of the main control board , but its been my experience that this maybe able to be reset and it may never come back or it will not reset and the control board will need replaced (50/50)


cycling power may reset this

I appreciate the post, dan moore!

From the information you have provided your Frigidaire range is displaying an "F11" error code. Typically, the "F11" error code stands for a shorted keypad. This could be a false error code and the best way to clear any false error codes is to disconnect power from the range for at least ten minutes. If you continue to get an "F11" error code you may need to replace your EOC (Electronic Oven Control), I would recommend having a professional technician come out to properly replace any electrical component to avoid personal injury. Hope this information is helpful to some degree. -Matt

The "F11" fault code indicates a shorted button on the electronic oven control. This means the oven control board will likely need to be removed and replaced. You could disconnect power, wait 30 seconds and reapply power. If "F11" returns upon power-up, replace the electronic oven control board (EOC). but if i had your model number i could nail it right on the head with a fix...

F11 indicates a fault with the main control board.
Prepare yourself for a shock when you click on the parts link.



Click here for the part

Sorry to be the bearer of bad news.

F11 indicates a fault with the main control board.

Not sure what machine you have?

F11 Error Code for Whirlpool Duet & Duet HT :

F11 is Serial Communication Error, communication between the central control and the motor control unit cannot be sent correctly.

Check all connectors at the motor control and the Main control, check the motor, check drive system for any worn or failed components.

This is the only F11 Error code I could find for a washer.

If you were already experiencing the F11 error code and now experiencing the Fdl error, this more than likely is a failure of the Main Control Board. F11 is a serial communications error associated with the Main Control Board, while the Fdl error is either a failed Main Control Board and/or door latch. You can replace the door latch first to see if the error goes away, but I would almost bet you have a control board problem since you were already experiencing an intermittent error code associated to it. Let me know if you have any further questions.