Hey there, this is Cheri Torres with DISH Network customerservice. I wanted to see if I could help you with the question you posted aboutthe Vizio sound bar. I was unfortunately not able to find any codes for theVizio sound bar. Another option you can try is running a channel scan to findyour code that will work best to control your sound bar. I hope that theseinstructions are useful to you. If you have any further questions or concernsplease feel free to post back here or email me at [email protected].
Remote: All Remotes (except Basic)
Then Press STAR (*)
We have Vizio Sound Bar model VHT215.
Code entered into Dish Remote [AUX] button was 2709.
of course the first digit 2 is for 'other device'. Dish remote
in Aux mode: Power button and volume controls the sound bar.
Vizio universal remote code for the sound bar should be 1517. I do not know if there is a 5 code solution as well.
SOURCE: Looking for Dish remote code for Vizio VSB200
Here are the remote code for some Vizio
505, 627, 775, 758, 756, 885, 864
If these do not work you will have to contact Dish to upgrade you receiver unit to respond to the newest code for your remote or use the remote that came with you unit to control it.
I hope this helps. Have a great day!
SOURCE: Need Dish 6.3 IR/UHF remote
I found your post interesting, pzednick! What you would need to do is check with the manufacturer, Vizio, for the correct code. We don't have them for sound systems like that; the manufacturer should. Let me know if you have any other questions that I can help with!
Delivering video anywhere, anytime.
SOURCE: Need Dish remote code (6.4 IR/UHF) for Vizio VSB200 Soundbar...
There are no codes available for a 6.4 remote on a Vizio Soundbar. Below are the steps to Power Scan the remote control. This will search all codes 1 by 1 until it finds a code that works, or exhausts all available codes.
Power Scan:
1.) With the Soundbar on, press and hold the AUX mode button (about six seconds) on top of the remote until all mode button backlights come on, then release.
2.) Press 2 then press STAR (*)
3.) Press the Up arrow button once a second while pointing the remote at the Soundbar. If the code for the Soundbar comes up, it will power off.
4.) Press the POUND (#) button. If the code entered is valid for the remote, the mode light flashes three times. To verify the code works try several different functions for that equipment.
Tommy Faust
DISH Social Media Representative
14,734 views
Usually answered in minutes!
×