Set date & time - Polaroid I1037 Digital Camera

Want to set the date and time for your mobile phone? Follow these easy instructions.
From a Home screen, tap the Arrow icon to display all apps.

1. Navigate: Settings > Date & time.
2. To use network-provided values, turn on the following:
   • Automatic date & time
   • Automatic time zone
3. When manually setting data & time, perform the following:
   Automatic date & time and Automatic time zone settings must be turned off to manually adjust date and time.
   1. Tap Set date.
   2. Adjust the date then tap OK.
   3. Tap Set time.
   4. Adjust the time then tap OK.
   5. Tap Select time zone then select a time zone.
4. If desired, tap Use 24-hour format to turn on or off .

1. From a home screen, select Apps (located in the lower-right).
2. Select Settings.
3. If applicable, select System (appears in Starter mode only).
4. From the SYSTEM section, select Date & time.
5. To use network-provided values, select the following:
   Enabled when a check mark is present.
   • Automatic date & time
   • Automatic time zone
6. If not using network-provided values, perform the following to adjust date & time manually:
   1. Select Set date.
   2. Adjust the date then select Set.
   3. Select Set time.
   4. Adjust the time then select Set.
   5. Select Select time zone.
   6. Select the time zone.
7. Select Use 24-hour format to enable of disable.
   Enabled when a check mark is present.
8. To change the date format:
   1. Select Choose date format.
   2. Select one of the following:
      • Regional (6/7/2013)
      • 06/07/2013
      • 07/06/2013
      • 2013/06/07

Date and Time Settings Pantech Marauder

Date and Time Settings Pantech Marauder

Date and Time Settings - Pantech Marauder™ [Device-Specific Instructions]

1. From a home screen, select Apps (located in the lower-right).
2. Select Settings.
3. If applicable, select System (appears in Starter mode only).
4. From the SYSTEM section, select Date & time.
5. To use network-provided values, select the following:
   Enabled when a check mark is present.
   • Automatic date & time
   • Automatic time zone
6. If not using network-provided values, perform the following to adjust date & time manually:
   1. Select Set date.
   2. Adjust the date then select Set.
   3. Select Set time.
   4. Adjust the time then select Set.
   5. Select Select time zone.
   6. Select the time zone.
7. Select Use 24-hour format to enable of disable.
   Enabled when a check mark is present.
8. To change the date format:
   1. Select Choose date format.
   2. Select one of the following:
      • Regional (6/7/2013)
      • 06/07/2013
      • 07/06/2013
      • 2013/06/07

.
System
Setting the date and time
To set the date and time, tap
APPS
>
Settings
>
Date & time
.
Tip
: If you travel frequently or live in
an area that uses daylight saving
time, and have mobile network access, activate
Automatic date & time
from this menu. Your tablet will set the date and time based on information
it receives from the network

1. Choose Apple menu > System Preferences, click Date & Time, and then click Date & Time.
2. Set the date and time. For more information about the options, click the Help button.
3. Click Time Zone, and select your city.
   
   

OS Lion Set the date and time

To set the Date & Time, go into the BIOS setting - date 7 time.
When you set the Date & Time and you get this error again when you next boot up your computer, then most likely you have a flat BIOS battery.
Then replace this battery, it could be a coin size battery - 3 volt lithium battery type CR2032. and then go into the BIOS setting and set the Date & Time.

Hello There!,

I think I can help you :-)

Here is the link for the user manual
http://gdlp01.c-wss.com/gds/7/0300001857/01/PSA480_CUG_EN.pdf

On page 16 it explains two ways to set date & Time.
1st is when you turn on the power it will ask you to set the time & date, and you can enter it.
2nd way to set time & date, or change it is to press the MENU key, and select "Set Date & Time".

I hope this helps you.
Please also giving me a good rating for offering you help, :-)
Thanks,

Select Menu > Settings > Date and time. To set the date and time, select Date & time settings. To set the formats for date and time, select Date & time format. To set the phone to update the time and date automatically according to the current timezone.
You can get more help from downloading the manual from Nokia at http://nds1.nokia.com/phones/files/guides/Nokia_7020_UG_en.pdf

The Date & Time have been reset message appears after the Language screen the first time you turn on the camera. It may also appear if the batteries are removed for an extended time.

1. SET DATE & TIME is highlighted. Press the OK button.
   (Select CANCEL to set the date and time at a later time.)
   
2. Go to Step 4 below, Setting the date & time, anytime..
   

Setting the date & time, anytime

1. In any mode, press the Menu button.
   
2. Press to highlight Setup Menu , then press the OK button.
   
3. Highlight Date & Time, then press the OK button.
   
4. Press to adjust the date and time. Press to advance to the next setting.
   
5. When finished, press the OK button.
   
6. Press the Menu button to exit.
   

On the main menu select Settings, then Time & Date.
Set Time zone updating to Manual.
Then SCROLL down i.e. drag the menu upwards (this is the bit that many don't realise.)
Then you will be able to set the time & date.