The only hole is the spout over which the hose is placed. But the water will not run down the hose, it leaks into the receptacle which still needs to be emptied. The hose is placed through the front of the unit and fits onto this spout. Am I missing something?The only hole is the spout over which the hose is placed. But the water will not run down the hose, it leaks into the receptacle which still needs to be emptied. The hose is placed through the front of the unit and fits onto this spout. Am I missing something?
You can't post conmments that contain an email address.
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
well if the unit has never been taken apart and cleaned well inside, and it's five years in service , Id say thats your problem, anything thats got room air blowing thru it for five years ,It's gonna need to be tottaly cleaned in all areas
the general accepted Rh for the avg home is 70% Rh
this is dry enough to not promote mold growth but wet enough that all your wood surfaces wounlt dry out and crack
However, I think you'll find that draining into a bucket is not an option. As the hose drain relies entirely on gravity to drain. So, it will not drain down and then up into a bucket. The hose drainage method, is designed to drain into a floor drain or a sump.
The easiest way to reset it is to Turn the unit Off and unplug it for 15 minutes.Then plug *** back in and turn it ON. During the 15 minute timeout, it should have had time to reset itself and revert back to the original factory settings. Now, you can set the controls, as you like.
There should be a drain hose to drain water!!Check tank for leaks or obstructions-check that drain isnt clogged!!un clog and clean as necessary!!! Best of Luck!!!!
The only hole is the spout over which the hose is placed. But the water will not run down the hose, it leaks into the receptacle which still needs to be emptied. The hose is placed through the front of the unit and fits onto this spout. Am I missing something?
×