Question about Minolta Office Equipment & Supplies

1 Answer

Minolta QMS 2350 showing service call 15 xfer belt

Posted by on

Ad

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Expert
  • 300 Answers

Your error means -
Incorrect pressure by or separation from the transfer belt cleaner
Remedy
1 - Check the Belt cleaner positioning sensor pc9 (located at the rear on the left hand side towards the top when looking from the front of the printer)
2 - Replace the Second image transfer roller pressure/separation
mechanisms.
3 - Check the Image transfer roller pressure contact solenoid SL2 (this sits more in the middle behind the printhead)
4 - Replace PWB-A.
5 - Replace PWB-P.

Posted on Jul 05, 2008

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE:

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How to fix service call 14 xfer roller


Remove the Transfer roller sponge looking roller and replace

Btw, I’m available to help over the phone in case u need at https://www.6ya.com/expert/normanj_7893313f0751935f

Feb 17, 2014 | Minolta magicolor 2350 Laser Printer

1 Answer

Service Call 15 Minolt 2350


replace the transfer unit sir/mam

Btw, I’m available to help over the phone in case u need at https://www.6ya.com/expert/normanj_7893313f0751935f

Apr 21, 2010 | Minolta magicolor 2350 Laser Printer

1 Answer

SERVICE CALL 14 XFER ROLLER Have installed new transfer belt. Still had error message. Came here and read tips. Cleaned the sensor both in the printer and on the transfer belt; reinstalled. Still...


the transfer roller is a foam roller that transfers the toner onto the paper. It will be visible with toner removed, a little wider than a piece of paper, and about the thickness of a roll of quarters. I don't know how to physically remove it on your model, but transfer roller issues in general can be remedied by removing the transfer roller and wrapping it in packing tape until the tape comes off clean.
While you're in there, vacuum everything out for good measure; but never, ever use canned air on a laser printer.

Jan 03, 2010 | Minolta magicolor 2200 DeskLaser Printer

1 Answer

Service Call 15H


FATAL ERROR CODE 15H / SERVICE CALL 15 XFER BELT: Incorrect pressure
by or separation from the transfer belt cleaner

something wrong with the transfer belt

Apr 01, 2009 | Konica Minolta magicolor 2300DL Laser...

1 Answer

Where is the drum reset fuse located on the Minolta 2530 DL print


you can find all details with picture shot on following website:
ftp://ftp.minolta-qms.com/pub/cts/out_going/manuals/2530dl/user_e.pdf

please post back if any changes and vote all answers.

good luck

Feb 07, 2009 | Minolta magicolor 2350 Laser Printer

1 Answer

My konica minolta magicolor 2350 has come up with the error message service call 15 xfer belt


Morning

I followed instructions given and everything is now running great.

Many thanks

Wendy

Aug 19, 2008 | Office Equipment & Supplies

1 Answer

Konica minolta opc drum magicolor 2350 printing problems I have replaced the opc drum on magicolor 2350 and also the black (k) ink cartridge and now can only really print in yellow, sometimes the other...


When you print stop the printer half way through then check the image on the opc drum and transfer belt to see if it's complete or not, also you may want to check the aidc sensor (sometimes the cable comes loose). I can e mail you the 2300 series service manual (4.17mb) if you reply with your e mail address

Jun 15, 2008 | Minolta Office Equipment & Supplies

1 Answer

Minolta-qms 2300 DL


open the front door, remove the waste toner bottle then remove the drum. turn it upsidedown and you'll see 2 metallic covers hiding the fuser. you can remove one of those covers very easy and replace the fuse

Jan 01, 2008 | Minolta magicolor 2350 Laser Printer

Not finding what you are looking for?
Office Equipment & Supplies Logo

Related Topics:

241 people viewed this question

Ask a Question

Usually answered in minutes!

Top Minolta Office Equipment & Supplies Experts

Adorjani Laszlo

Level 3 Expert

1316 Answers

Norman  J Weimar Jr
Norman J Weimar Jr

Level 3 Expert

6850 Answers

Ed
Ed

Level 3 Expert

473 Answers

Are you a Minolta Office Equipment and Supply Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...