JVC NX PS1 - No sound output when connected to PC

1. You will need a VGA or S-video cable and a 1/4 inch stereo plug that will go from the earphone jack to the EZpro then out to a amplified system for the sound.
2. I believe the EZpro has connections for HDMI which will supply sound as well as High definition video. You should have an adapter for the HDMI also if you

3. connections port as follows:
1. USB Connector (Connect to PC for Remote Mouse function)
2. RS-232 Connector
3. Audio Input Connector
4. S-Video Input Connector
5. DVI-I Input Connector
(PC Digital (HDCP)/PC Analog/Component Video Input)
6. VGA In/SCART Connector (PC Analog Signal/Component
Video Input, HDTV/SCART Input)
7. VGA Output Connector (Monitor Loop-through Output)
8. Power Socket
9. KensingtonTM Lock Port
Looking at the usb port go counter clockwise the numbers are in succession. 1- 9

1 Power Cord
2 VGA Cable
3 DVI-I to VGA Cable (Optional accessories)
4 Audio Input Cable (Optional accessories)
5 RS232 Cable (Optional accessories)
6 USB Cable (Optional accessories

Had the same problem, unit came on with "Power Error" for a few seconds then shut down. Checked the JVC power supply and had the correct 23.5 VDC at the pin jack. Re-inserted the power jack and quickly kept randomly pushing the front play, stop, FF, Vol + - and rewind buttons on the unit. It came on and is working fine. Guessing it's an internal software or component issue sensitive to our constantly fluctuating and failing commercial AC service

Hi there, found the following cable on ebay - the picture clearly shows both ends so you can verify that it will plug into your camcorder. 
http://cgi.ebay.com/For-JVC-Camcorder-Mini-DV-to-PC-Computer-USB-Lead-Cable_W0QQitemZ350183177004QQihZ022QQcategoryZ139969QQssPageNameZWDVWQQrdZ1QQcmdZViewItem

go to jvc.com..instruction manual(owners and set-up)are there.RICHARDM69

means either istallation is not done properly or there might be a problem in usb cable.take out the usb cable and connect it again tightly then it eill show you on the desk top that Everio is connected.

See below for the correct setup to get the best clarity sound possible.

From Set top box:

1. Audio: optical or digital coax cable output --> jvc system Input
2. Video: hdmi output--> jvc system input

From JVC System:

1. Video: HDMI output---> TV HDMI input

TV:

1. only accepting HDMI input from JVC System.

This will provide you will sound from your jvc system at all times. Your JVC system is made to be used as a hub. So essentially what you are trying to do is connect all components into the JVC system. Then only connect the video portion to your TV. The TV itself should NOT be emitting sound.

Note: You may need to turn off the speakers in the TV setup menu to acheive no sound from the TV. This will make for the ultimate experience.

If youve rigged it to watch dvd's while moving. the sat nav thinks the parking brake is on and wont move. The vss cable needs to be connected as well.

Fist of all I like to inform in computer S-Video output of the camera usually does not fit to computer. Only if the computer has S-Video Input card it will be possible. However logic is simple. Digital Camera or Camcorders uses 1394 or USB connection to connect to the computer. You havent indicate what model of JVC you use, almost all JVC Digital Cameras come with USB connection option. All you need to put USB cable in between. If it asks driver, use the CD comes with the Camera or download from JVC's support website.
http://support.jvc.com/

Good Luck

Hi there,
I also had the same problem when using my optical output for DBS and DIGITAL DVR/DVD.. you need to change the setting for this by on the remote changing to either analouge..rca sound input or Digital...for Optical input. The same problem cuaght me oput for a long time as well. The button is when you slide down the remote cover and the button is called analoug /digital

I had this problem with the GZ-MG505AA (connecting to WinXP SP3). I tried a different USB cable and it worked first time.
Not sure what is different about the cables (the original cable worked fine with my WM 6 mobile phone).