I need the driver for VN-4100PC. Any Ideas? The site http://www.mywma.org/vn2100pc.html was shut down 11-25-2010 and I cannot find another place to get this driver.

You didn't specify the operating system for which you're seeking the driver. You may or may not see it at
http://www.olympusamerica.com/cpg_section/software_results.asp?id=1291&os=w

Olympus.com

click on the link below for the driver...
http://www.olympusamerica.com/cpg_section/cpg_support_downloads.asp?id=1291

Got the same problem but then THANK GOD I have found this web: http://www.mywma.org/vn2100pc.html then after installation you have to update the driver from: http://www.olympus-europa.com/consumer/2590_software.cfm
N A

Is your digital wave player an outdated version?If so, you may have to update it you can get it from the Olympus site..I downloaded the original software from: http://www.mywma.org/vn2100pc.html then update it from : http://www.olympus-europa.com/consumer/2590_software.cfm

Hope this helps =)

You can download the drivers on link below.

http://www.olympusamerica.com/cpg_section/cpg_support_downloads.asp?id=1291


Good luck and please rate 4 thumbs for the free answer

http://www.mywma.org/vn2100pc.html

we have a hero his name is Doug Hill email - [email protected], please the link above and shame the Olympus people for not caring enough for their customers.

i will never buy any Olympus ever again, and i urge others not to do so.

Thanks to Doug

Glenzito!!!!!!

Hi
Driver related problems can be easily solved on this page: Driver Update Software for XP Vista 7 8 enjoy

Someone has posted the file here....

http://www.mywma.org/vn2100pc.html

perhaps its the title space issue this person refers to? http://www.mywma.org/vn2100pc.html

i found this on here, and the deal is you have to install the old software and then run the update. the software should come with 2.1 and you can use the following link that is posted here:
Digital wave player update 2.1.4

now to get you to VN 4100PC: i just followed the links and its the same update file for the 3100 and the 4100. you have to select your OS as well so giving you the link that i used might not be much help. but the solution is in the pattern of paths, not just one place.


Here is the download instructions for the VN recorder software itwork with the VN 240Pc up to the VN 4100PC and Widows 2000 - VISTA.


Digital Wave Player (2.1): is available via download as a courtesy, please follow the instructions below:
http://www.olympusamerica.com/files/DigitalWavePlayer.zip
After unzipping the file, click on the SETUP.EXE file to begin installation.
Download update: http://olympusamerica.com/files/DWPUP2EN.zip
Download update 2.1.3: http://olympusamerica.com/files/DWPUP4EN.zip



good luck,
DosDawg

http://www.olympusamerica.com/cpg_section/cpg_support_downloads.asp?id=1291&os=w