Universal remote I AM HAVING TROUBLE PROGRAMMING THE UNIVERSAL REMOTE TO THE DISH NETWORK SYSTEM. I HAVE A BOX IN THE LIVING ROOM NO BOX IN THE BEDROOM. I NEED THE REMOTE TO WORK IN THE BEDROOM.

Multiple Boxes, same room, remote changes ALL TVs - Comcast Help ...

forums.xfinity.com/t5/XfinityTV...remote-changes...TVs/td.../1441397

Oct 13, 2012 - I have 1 DVR box and 2 small boxes for a 3 TV setup in my living room. ... to have each remote only change channels for the box it's associated with? ... Nope,both the DTA's and the newer RNG & DCX boxes use the same IR codes. ..... Thatdoesn't help anyone who has multiple tvs in the same room and ...

Dish Network TV 2 Duo tuner fix Dish 722 (877) 576-7100 ...

? 9:54
https://www.youtube.com/watch?v=e5154_wVkcc
Apr 7, 2014 - Uploaded by SilverStar Satellite Dish Network Retailer
On my tv 1 I keep changing it and it changes on TV 2 too so weboth watching .... My tv2 remote doesn't ...

FAQ's ' seiki

weak batterys wont hold codes on it huh?

Hi Gw, my name is Mike Houston a Social Media Representative at DISH. I understand you want to program your innvoage remote to our DISH receiver. When we send out our DISH receivers we will include our own DISH universal remotes that can control many different components like; HDTV, surround sound receivers and sound bars. We do not have the codes for other universal remotes to work with our system. I will provide you a link explaining in more detail on programming your remote: http://www.ehow.com/way_5501311_innovage-jumbo-universal-remote-instructions.html

Hi my name is Mike Houston of DISH Network and I was going over yourpost and see you want to program the universal remote to the DISH Networkreceiver. To be able to get the full use of the receiver it is better if youhave the DISH remote, I will leave you my e-mail address if you have anyquestions about getting the remote that goes with the system. [email protected]

you will need your Dish network remote to program your dish network box. This universal will not work. but if you need the full codes for this remote to program to your tv then go download the full manual with codes here.

Hi my name isMike Houston of DISH Network and I was going over your post and see you want toprogram the universal remote to the DISH Network. While other remotes may workwith our system the best thing is to use a DISH remote, I will send a link thatgoes with the universal remote; http://www.jumbouniversalremote.net/how_to_program_universal_remotes.html.If you have any questions please e-mail me at [email protected].

Hello! On the back of your receiver box you'll see a silver UHF antennae make sure its pointing straight up. If that fails try the steps in this link
http://www.dishnetwork.com/SupportSection/remote-setup
Daniel Busa
DISH Network Customer Service

ronwright22

I have provided a link for you to Vizio's Website. The information below is for a VSB210WS sound bar. I would go to this link and research your model number and look for the code. You may try the code on this screen to see if it will work. I have also provided a link with instructions on programming your DISH remote to other components.

Vizio Website:

http://www.vizio.com/vsb210ws.html
This is the VSB210WS sound bar.

Programming a Universal Remote to operate the HD Sound Bar System If you own a VIZIO TV with a Universal Remote that uses a 5-digit programming code, you may program a device button with code 31517. This will map the Universal Remote button to operate the HD Sound Bar System as follows: Pictured at right is the VIZIO VUR8P Universal Learning remote.

Ray Calo
DISH Network

To control a Dish Network PVR/Satellite, it needs to be set to respond to the default Remote Address (1).

To reset your Dish Network PVR/Satellite to the default Remote Address:

1. Press SYSTEM INFO on the receiver's front panel. The System Information screen displays on the nearby TV and shows the Remote Address.
2. Using the original Dish Network remote, press and hold SAT on your remote control for about three seconds, until all of the mode buttons light up, and then release SAT.
3. Using the NUMBER PAD, press the 1 button
4. Press POUND (#). If you entered the address correctly, SAT will flash three times.
5. Press RECORD. Make sure the Remote Address you see on the System Information screen is 1.
6. Press the SELECT button on the front panel to close the System Information screen.
7. Your Harmony remote should now control your Dish Network PVR/Satellite box

NOTE: Dish Network PVR/Satellite receivers sometimes have two tuners, allowing them to be used in more than one room on different TVs. Harmony remotes can only control a Dish Network receiver's main tuner while still in the same room with direct line of sight to the device.


What other issues are you having with the remote?

try this website, you have to scroll down and find "Innovage" on the list and then it will download the pdf of the manual.

http://www.xdiv.com/remotes/