Please can you help me with my samsung dvd r150 player.i need to reset it to its factory settings,thanks

if you have moved them needs an ohmn meter or osilloscope
they both a very narrow range so cant do much wrong by tweeking

i cant find anywhere to buy those two pentimeters in 2017

they could be dust effected
note where they are positioned
put both in the middle position and gently move them back and forth
then back to original position

Samsung DVD R150 recorder only picks up channels 2 7 9 10 &28, no digital channels, is this all it will record or am I doing something wrong with the installation?

Try unplug,replug the unit back an hour later,should have everythings,reset to Factory setting.If no,electronic component's parts burn in ur device.

There are three models: DVD-R150 , D-R150 and DVD-SR150M: I hope your model is one of these.
The english manual for DVD-R150 can be found at:
http://downloadcenter.samsung.com/content/UM/200703/20070320093749218_01273A-R150,155-XEU-ENG-BM.pdf

The english manual for DVD-SR150M can be found at

http://downloadcenter.samsung.com/content/UM/200708/20070821193220921_01452A-SR150M-XEU-ENG-BM.pdf

Hello, Please get the code here : www.dvdoverseas.com/dvd.htm
www.regionfreedvd.net/

Regards, Jay__Iuj8n9

Just a guess... But I'll bet you need to change the channel on your TV to whichever input you plugged your DVR into. And make sure the DVR is turned on.

Hope this helps.

go to menu, select formate, formate disk in V mode not VR.when finished recording finalize disk. you can then play on any dvd player.

I am trying to record on a Samsung DVDR150 but do not recognize the empty DVD. I would like to configure to Multizone too. Any Instructions on this? I bought this 6 months ago and have not give any use because of not knowing HOW TO CONFIGURE all this! Please Help.

I Do believe that Foxtel puts a block on movies so you cannot copy them..

do you mean wont play on dvd players (connected to tv)
if so its because the software you are using is not compatable.or the way you are burning them.for instance if you use nero dvd (mp4)you can only view with nero but you can config to use with any player.If you mean it wont play on other computers its usually wrong format.you can maybe cure this by updating dvd drive firmware.