Konica Minolta bizhub 161f remove fuser

Power off the machine, ensure the sub power switch is on that is the one on the control panel, now hold down the utility/counter button and turn on main power switch, wait to see trouble reset on screen the touch get OK then power off. Wait 10 second power on. if code comes back replace the fuser unit do not reset again or the machine can catch on fire the code you are resetting is for the fuse the HOT Part, that could ruin a perfectly good day

Btw, I’m available to help over the phone in case u need at https://www.6ya.com/expert/normanj_7893313f0751935f

on a Bizhub 161f?

Btw, I’m available to help over the phone in case u need at https://www.6ya.com/expert/normanj_7893313f0751935f

C0500 is a warm-up error on those little machines. Try holding the stop button while switching on, that should reset the code. It sometimes happen if it's kinda cold, or when the power dips. If the code comes back, you'll have to replace the fuser unit.

Press STATUS, YES, DOWN & UP ARROWS on Zoom for the counter. Page 3-38 on USER GUIDE BOOK
http://kmbs.konicaminolta.us/productsattachments/manuals/bizhub_161f_User_Guide.pdf

Este código significa que la vida las partes de su desarrollo + unidad de imagen se ha caducado. Ahora es el momento de reemplazar las partes.

if you print a report and there is no line its the adf **** glass so clean it with a rag and glass cleaner

Hi jdt_mk,

Sorry to hear you have a C-14a3 code.
In my experience, this code spells disaster for the 161f.
The image reader has failed. The part can be replaced, but the cost would almost outweigh the cost of replacing the machine.
I have personally had to deal with two 161f with the same code.
Both times we changed the machine (because it was on contract).

Sorry it's not good news

No, you can enter only IP address.

hi
you can download the software from the following link

http://onyxftp.mykonicaminolta.com/download/SearchResults.aspx?productid=832&filetypeid=0