Onkyo TX SR-805 receiver has been used in a home theater system since Jan. 2008. Cable and projector (Mitsubishi HD1000U) were connected to the receiver by HDMI cables and worked fine till June 6. After a 3 weeks vacation during which the receiver was unplugged there is no video through HDMI; audio is ok. I get video using component cables for IN and OUT of the Onkyo receiver.
Register and download the manual for free at retrevo.com
http://www.retrevo.com/support/Samsung-HT-Z310-Home-Theater-Systems-manual/id/23122dj393/t/2/
The fewer hops and inteconnects a given signal experiences between its source and your senses, the better. I always run the BEST video from any source to the TV first; the best Audio to the BEST audio electronics. If that helps.
760 views
Usually answered in minutes!
no video through Onkyo TX-SR805 with HDMI:(
Anybody?
Mines doing the same thing. Audio but no video no matter what hdmi source Input into the reciever, there is no video coming out. I have checked all my connections, changed wires, the video on the units work fine when connected to my tv but when I connect to the receiver, bye bye video just sound? I am thinking there is a problem with these units?
I have the same problem. It suddently fails to output video to TV via HDMI. However, composite works. I did contact Onkyo who suggested to reset the unit. If it still does not work, contact service center. I will contact service center in before out of warranty.
×