At Fixya.com, our trusted experts are meticulously vetted and possess extensive experience in their respective fields. Backed by a community of knowledgeable professionals, our platform ensures that the solutions provided are thoroughly researched and validated.
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
red, green, and blue lines curve across the top of tv is cause by defective convergence STK IC or you have open resistor at convergence section. if you have defective RGB Color vertical ramp probably you have defective STK IC..
Pinout : Pin Name Direction Color Description 1 RED OUT Red Video (75 ohm, 0.7 V p-p) 2 GREEN OUT Green Video (75 ohm, 0.7 V p-p) 3 BLUE OUT Blue Video (75 ohm, 0.7 V p-p) 4 ID2 IN Monitor ID Bit 2 5 Gnd Ground 6 RGND Red Ground 7 GGND Green Ground 8 BGND Blue Ground 9 KEY Key (No pin) 10 SGND Sync Ground 11 ID0 IN Monitor ID Bit 0 GND=Color; NC=MonoMonitor ID Bit 0 12 ID1 or SDA IN Monitor ID Bit 1 NC=Color; GND=Mono Some systems only uses ID0 for monitor ID 13 HSYNC or CSYNC OUT Horizontal Sync (or Composite Sync) 14 VSYNC OUT Vertical Sync 15 ID3 or SCL IN Monitor ID Bit 3
you have bad convergenze this fault is common and need qualified person to change the STK
ic's
call repair man
please don't forget to do excelent rate cause i here to help you
regards
×