I have been synching all my devices to the Comcast On Demand remote (5 digit codes) and the one supplied for Marantz does not work. Is there a remote code that works or is the AR too old? Thank you I have the comcast remote (5 digit codes). The comcast provided code (30189) does not work. Also, I am unable to find the code using the search procedure. I noted I could program the TV and the Marantz DVD unit with this remote.
Click here for Comcast Remotes Five Didgit Codes hope it works for you did for me.
SOURCE: Martantz SR 3000 - Are there any remote codes
Hi, sorry it took so long for me to get back to you. The system does not give us updates on older problems.
Found the manual, and it does have 5 digit codes, Page 2 lists the codes for marantz as 0321, 0269. Hope that helps you.
regards
robotek
0154, 0236, 0463, 0180, 0282,
0178, 0179, 0038, 0177, 0280
The Comcast Custom 3-Device universal
remote control is preprogrammed at
the factory to operate the Cable Box
supplied by your Comcast system, an
RCA TV, and an RCA VCR (in the AUX
mode). To control devices other than
default brands (excluding the Cable
Box), perform the below steps; otherwise
skip this section:
1* Turn on a device (e.g., VCR or DVD
Player) and, if applicable, insert
media, (e.g., video cassette or disc).
NOTE: Please read steps 2 to 6 completely
before proceeding. Highlight or write
down the codes and device you wish to
program before moving on to step 2.
2* On the remote control, press a
device key once (i.e., AUX or TV).
NOTE: Use the AUX key to program
control of an Audio Amplifier or
Receiver, a DVD Player, a Home-
Theater-In-A-Box Device, a PVR (or
DVR), or a VCR.
3* Press and hold Setup until the
selected mode key blinks twice,
then release Setup.
4* Locate the code for your device in
Manufacturer's Codes on the back
of this user guide. Brands are listed
in alphabetical order with the
most popular codes listed first.
5* Enter the first four-digit code for
your device. If you perform this
procedure correctly, the selected
mode key will blink twice.
NOTE: If you enter an invalid code, the
selected mode key will display one long
blink and exit the programming mode.
Repeat steps 2 to 5 with a valid code.
6* Aim the remote control at your
device and press Power once. The
device should turn off. If it does
not respond, repeat steps 2 to 6,
trying each code listed for your
brand until you find one that
Searching For Your Code.
NOTE: If the device does not have a
Power key, press the (Play) key
OK
5 digit code :- 10463, 11409, 11904, 11911,11935 (Comcast Universal Remote )
4 digit code :- 0463 (COMCAST - CUSTOM DVR-3 DEVICE UNIVERSAL REMOTE CONTROL)
ok
1,463 views
Usually answered in minutes!
Same problem with Marantz CR8000. 5 digit code provided does not work but remote will control a TV
Same problem with Marantz SR780 -- got the new remote with 5-digit codes
and the only code they give for Marantz doesn't work for me. I noted the new
code (30189) is the same as one of the old 4-digit codes with a 3 in front so
tried tacking a 3 on the front of the old codes but none of those worked. I
called Comcast support and actually got someone who understood my
problem and tried to help -- suggested adding a 0 in front of the old codes
but none of those worked either... Tried to get an old "grey OK button"
Comcast DVR remote with the 4-digit codes but local offices don't have
them anymore. Solution: gave up and got a Harmony remote.
same problem all around. nothing works for fixing the marantz receiver. Oddly, my remote for DirectTV works just fine with it...
×