Can't connect d-link D!-624 after having computer serviced

It can connect as much as 10 computers or wireless networking devices. As long as your base connection is good you can connect as many devices as you can. Because the wireless technology is unlimited and limitless.

1. You will have to use the CD that came with the router and go through the "setup Wizard" and establish a new password.
2. contact your ISP ( internet service provider0 and get the information to input into the router to connect properly to the internet.
3. Go to the D-link page and an instruction set for your model router is there to guide you through the setup.

It's a good thing that your computers are picking up the Wifi connection. But the connection to the Internet is another matter. Call tech support of your ISP (Internet Service Provider) to make sure that your Modem (Cable or DSL) is configured to connect to the Internet at all.

Just a matter of accessing router software and re- typing U/N and P/W

try following this.. it is for DI-524 but the interface should be the same.

http://www.howtodothings.com/computers-internet/how-to-secure-a-d-link-di-524-router

connect the the ethernet cable to the WAN port of the modem.

the connection should be:
One end of the cable is connected to the modem and the other should be connected at the WAN port of the modem.

Now use another Ethernet cable plug it in on the LAN port1 and the other end to your computer.

Access the configuration page of your router and set the wireless setting inside your DI-624 router.

You wireless router/access point can host several simultaneous connections to the internet. Just connect your laptop to the wireless network as you would from your desktop computer.

Hope this helped.

MO

go to vonage and DI websites for altenative hookup guidance.

you just cleck dlink, then properties, then cleck advance check the computer internet

try a cross cable between di-624 and westell dsl router.