Can I order replacement burners and grates for in black? If so could I get a price? We have gray burners and grates that are chipped and stained. We would like to replace them with black.

abrasive cooker cleaner. and pad. should clean it off. give it a good scrub.

It's really simple. Remove the burner grates, removed the old drip pans, then drop in the new drip pans. You can order a new drip pan from partselect.com if you don't have one yet. Let me know how this works out and if you need any further help.
Benjamin

As to the grates sagging it depends on the manufacture on a recall. Generally when you order the replacement parts unless there has been an enhancement by the man., they will be the same.
be sure not to use high heat for long periods this is what cause metal fatigue.

go to appl parts depot web sight . inter model and the brake down will show them .. i have ordered them from them .. hope this helped . mm

I THINK NO AVAILABLE FOR REPLACE COZ IS FACEOUT MODEL AFTER 10YRS.ALSO U CANNOT REPAIR COZ EVERY TINE U USE WILL BROKEN AGAIN.

We Use Debruce Polish on all our cooktops. Debruce also works on stainless steel and polished granite, marble, porcelain, formica and glass. DeBruce is non-toxic odor-less and eco-friendly. You can get DeBruce on line at debrucepolish.com.

Hey y'all. I have the same lame GE profile gas cooktop with the gray grates and burner covers. I know this is the expensive way to go, but I use Easy-Off "self-cleaning oven" oven cleaning spray. For about $5, you get 3 cleanings. It is a pain to do, but I have better things to do than scrub these grates all the time. I don't know why, but the baked on crud just drives me crazy. I tried everything to clean them completely. I even tried to scrub the darn things with a kitchen pumice stone(sold at walmart)but it is impossible to get the curvy areas clean. Now the paint has started to wear off on the burner covers.

I do not use the oven cleaner on the cooktop itself. I use soft-scrub with baking soda, then cover the cooktop with a sheet of heavy duty aluminum foil and cut out holes for the burners. This keeps most of the spills contained, and helps with cleanup.

I visited to the GE parts web page, and they only sell gray grates and covers. I am going to buy black BBQ grill paint(spray can)from Home Depot and try it on the burner covers first. They are the least expensive to replace if it fails, and if it works, I will paint the grates with this high temperature paint. I will keep you posted on the results.

Regards,

Laura D.

Stainless is hard to clean if you dont keep up with it. Black is horrible because you see every imperfection. white turns color after some time..

I suggest stainless if you keep up with it.

No. If it is really important order the grates and downdraft cover as replacement parts. This will be expensive probably around $200 - $300.

You should never use large amounts of water on any electrical appliance. If the moisture is under the glass, it will need to be replaced.

always unplug electricity before attempting to repair on any electrical appliance