At Fixya.com, our trusted experts are meticulously vetted and possess extensive experience in their respective fields. Backed by a community of knowledgeable professionals, our platform ensures that the solutions provided are thoroughly researched and validated.
Re: Screen says access powered and I can't do anything
You can tr y a cold restart (erases all info on machine but it may delete whatever is holding it up. for directions on a total reboot http://www.notsofaqs.com/faq_pg17.php
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
Hello,
Try the following..
- remove battery and power on the note book with power cable.
-if issue not solved ... check if you have access to memory card and reset it.
Have you tried starting in safe mode to see if it will boot that way? In case your not sure how turn the computer off then when off hit power on and just start pressing F8 over and over until you get the black screen asking about safe mode. You might hear some beeping while doing it dont worry about that. Choose start in safe mode with networking.Quick question is there any reason the lapshows the screen of windows starting vertically like that instead of the normal horizontal way from left to right? Just curious if you did that or thats new too.
theres a little hole next to the power button. its a reset button you will have to use a pin or paper clip. That should reset it! or maybe its on the bottum! depends what model
In case of computer have crashed due to operating system , the computer could access the floppy drive or any other external media drive including CD, USB drive. There should be POST once you power the computer on . The black screen sound like hardware problem, so you must check the problem in any addon cards, cpu, motherboard, power supply to access the floppy disk.
Starting the PC without memory will result in a ?beep code? error, which is the beeping you are hearing. Replacing the memory should make the beeping go away. As far as accessing your BIOS if you PC won?t display anything they accessing your system BIOS won?t accomplish anything.
-When you start your PC with the memory installed do you see anything displayed on the screen?
-Was the PC operating correctly before your reinstall?
-Why did you void the CMOS?
-Why did you remove the PC memory?
×