I just purchased a Sony BDV E770W home theatre system and there are 2 problems that I need help solving. I have a 30GB iPod Classic which I am trying to play through my home theatre system, but when I connect the iPod to the system using an Apple USB cable an error message reads: This iPod is not compatible with this system. Any reasoning to why I would be having this issue? My second problem is that our TV does not have either an HDMI or Digital Optical out jack on our TV, so as a result the Sony theatre is not supplying volume to our TV. We are using component cables at the moment on our Mitsubishi High Def. TV. Would you know if there is any other way i can connect my theatre to my TV so I would be able to get sound coming through the television? Your help would be greatly appreciated. Thank You

These are all the Zenith codes that I have listed.
Zenith 0016 0017 0092 0178 1909

Sounds like corrupted firmware. Contact the authorized service center for Sony. or, visit this site, sony e-support. This kind of fault/s are not easly repairable by a user.
https://esupport.sony.com/US/p/model-home.pl?mdl=BDVE770W&LOC=3#/howtoTab
If you wish to get some details; check the site linked here. Pull up older posts.
http://electronicshelponline.blogspot.com/

try this
1. Press DVD
2. Hold the magic button until the DVD button flashes twice.
3. Press 0533

4. Hold the magic button until the DVD button flashes twice.
5. Press 994
6. Press Magic Key (don't hold)
7. Press 1891 (this sets key 1 - the DVD button flashes twice)

8. Hold the magic button until the DVD button flashes twice.
9. Press 994
10. Press Magic Key (don't hold)
11. Press 2552 (this sets key 2 - the DVD button flashes twice)

12. Hold the magic button until the DVD button flashes twice.
13. Press 994
14. Press Magic Key (don't hold)
15. Press 0953 (this sets key 3 - the DVD button flashes twice)

16. Hold the magic button until the DVD button flashes twice.
17. Press 994
18. Press Magic Key (don't hold)
19. Press 2214 (this sets key 4 - the DVD button flashes twice)

20. Hold the magic button until the DVD button flashes twice. .
21. Press 994
22. Press Magic Key (don't hold)
23. Press 0795 (this sets key 5 - the DVD button flashes twice)
Done - the remote is now programmed and ready to use

I think your best bet is to remove the top of the unit and see what has caused it to lock. Removing the CD once the top is off may fix your problem.

It's already Region Free when purchased.

A+B+C Multi Zone Region Code Free Blu Ray Player DVD Region 123456 PAL/NTSC

PAL or MULTI-SYSTEM TV is required to watch PAL DVDs. If your TV was purchased in North America (NTSC) you will also need a Video Scaler Full HD 1080p.

Potiguara,

Se vcoce conseguiu descobrir como fazer, favor entrar em contato no email [email protected]

Having browsed the user manual I wonder if you plugged in the Sony BDV T57 Home Theatre System while the Polaroid FLM-2632 tv was powered down via the optical cable .
Then powered up the Sony BDV T57 Home Theatre System first and then powered up the Polaroid FLM-2632 tv
Maybe the Polaroid FLM-2632 TV has to detect that the Sony BDV T57 Home Theatre System is connected and powered up when the Polaroid FLM-2632 powers up. To activate its digital audio out ????
The note part about only being available only under HDTV (cable/air) mode. Might be the cause of your hassle also ?


DIRECTLY FROM THE USER MANUAL
source from
http://tv.manualsonline.com/manuals/mfg/polaroid/polaroid_flm_flm2632.html
"
? Connecting to Audio Receiver:
Use an audio cable to connect the audio receiver's audio LINE IN jacks to LCD TV's
AUDIO OUT jacks. ? Connecting to Digital 5.1 Sound System:
METHOD A:
Use an optical cable to connect the audio amplifier's OPTICAL IN jacks to LCD TV's
OPTICAL OUT jacks.
METHOD B:
Use a coaxial cable to connect the audio amplifier's COAXIAL IN jacks to LCD TV's
COAXIAL OUT jacks.
Note: Above mentioned function is only available under HDTV (cable/air) mode.
? Connect all AC power sources, before turning on the power switch of the LCD TV or
other connected equipment.
? Press the button on the remote to turn on the LCD TV."

Yes, you can buy a pair of AV cables from apple for around $70.00, you easly plug into your ipod and then the other part goes into your e system

I also have the same problem but now I think it's the type of I-Pod you use. Do you use the I-Pod 80 Gb video or the newer 160 Gb I-Pod with the cover flow etc. ? The documention of the HTD7001 says it's only support some I-Pods. I would know sure if I would have a type of Video I Pod wich is supported by the documentation

your description goes around and around, what do you actually want to do what is the main problem?