My Siemens XLM 1200 keeps stopping mid-cycle - with the ON button being lit as opposed to the ACTIVE. I re-set, then it happens again - approx 10-15 times per cylce! Any advice would be greatly appreciated!

Strange, I just replied to a question for a ZDF1200 WASHER.

https://www.google.com/search?q=Zanussi+ZDV+1200%2C+stops+mid+cycle

..

Check timer to insure the cycle is completing sometimes the vacuum sensing line gets plugged and cycle may not complete

Robert

Robert. You have a bad water valve OR completely clogged up filter screens on the valve. My past experience with this machine with this type of problem is to replace the valve assembly. part Number W10364988

This may be helpful https://www.google.com/url?sa=t&source=web&rct=j&url=https://appliances.wonderhowto.com/how-to/fix-your-front-load-washer-if-stops-mid-cycle-381047/&ved=0ahUKEwih1pv3nbnTAhVs54MKHaUjCZ0QFggiMAM&usg=AFQjCNF7coclPEiebS8nJGl_G2NURErywg&sig2=ociuz9U_coWL7oPvjlri4A

Dear customer,
                     When the spin cycle doesnt occur the most recommended steps are 

1. Test the lid switch
   
2. Test the timer control
   
3. Test the centrifugal switch
   
4. Test the water level switch
   
5. Inspect the motor coupler
   
6. Inspect the drive belt (belt drive only)
   
7. Inspect under the washer for soot (clutch)
   
8. Test the motor
   
9. Inspect the pulley
   
10. Test the transmission.

  You can click on the highlighted words to get details abt the checking procedure.. 

Plz rate this solution.. thank you.. 

I am having the same problem with my washer. Did you ever get it fixed??

Hi lushman001

I'm Harvey the Master Plunber.

Your question is: your 3-yr-old dishwasher (Whirlpool 24-inch ) stopped in mid-cycle. A small amount standing water in the bottom of the washer. None of the control panel buttons were lit up and none of them will work. NO POWER

First check all the breakers (or fuses).
Second check the electrical connections. If you're not a qualified electrician or service tech then call one. It"s under the unit behind the kickplate.

Feel free contact me again!
Please give me a rating here at fixya.com before you sign off
Thank you,
Harvey your Master Plumber

Check the water level control, it could be stuck or faulty.

main control cpu unit failing
needs to be replaced