The cover of the detergent dispenser does not latch properly and will flip open. The dishwasher is 6 years old and I think we need to replace the dispenser assembly but don't know how to take it off the door and put it back. The model number is GU1500XTKB0 Thank you for your help.

If your Bosch dishwasher's soap dispenser is not opening or draining properly, here are a few troubleshooting steps you can take:

1. Clean the Dispenser Area: Start by inspecting the soap dispenser area for any debris, soap residue, or obstructions. Clean the dispenser thoroughly using a damp cloth and remove any buildup that may be preventing it from opening or closing properly.
2. Check for Mechanical Issues: Examine the dispenser latch and mechanism for any signs of damage or wear. Ensure that the latch is engaging properly and that there are no loose or broken parts. If any components are damaged, they may need to be replaced.
3. Test the Dispenser Solenoid: The soap dispenser may be controlled by a solenoid that releases it at the appropriate time during the wash cycle. Check if the solenoid is functioning correctly by performing a continuity test using a multimeter. If the solenoid is defective, it may need to be replaced.
4. Verify Proper Detergent Usage: Ensure that you are using the correct type and amount of dishwasher detergent recommended for your Bosch dishwasher. Using the wrong detergent or excessive amounts can cause issues with dispenser operation. Consult your dishwasher's user manual for specific detergent recommendations.
5. Check the Drainage System: A clogged drainage system can prevent the soap dispenser from draining properly. Inspect the drain hose, drain pump, and any filters for blockages. Clear any debris or obstructions you find, and ensure that the drain hose is not kinked or bent.
6. Reset the Dishwasher: Try resetting your Bosch dishwasher by turning it off at the power source or unplugging it for a few minutes. This can sometimes resolve temporary issues and restore proper operation.

If the above steps do not resolve the issue, it may be necessary to consult the Bosch dishwasher's user manual for model-specific troubleshooting steps or contact Bosch customer support for further assistance. They can provide you with specific guidance tailored to your dishwasher model and help you diagnose and resolve the problem.

make this tests and fix it. God bless you

Dispenser Lever

If the dispenser is broken and doesn't open or close properly the dispenser lever might need to be replaced.


Enter your model number to see parts for your dishwasher.
Help me find my model number

Detergent Dispenser Cover

If the detergent dispenser cover is broken and the detergent dispenser doesn't work, the dispenser assembly should be replaced.


Enter your model number to see parts for your dishwasher.
Help me find my model number

Wax Motor Actuator

If the dispenser will not release the detergent the actuator connected between the wax motor and the dispenser might be broken. Check the wax motor actuator and replace it if necessary.


Enter your model number to see parts for your dishwasher.
Help me find my model number

Detergent Container

If the dishwasher dispenser doesn't work the detergent container may need to be replaced.


Enter your model number to see parts for your dishwasher.
Help me find my model number

Dispenser Lid

If the dispenser is broken and doesn't open or close properly the dispenser lid may have to be replaced.


Enter your model number to see parts for your dishwasher.
Help me find my model number

Detergent Dispenser

If the dishwasher dispenser doesn't work the problem is often related to the release mechanism. If the problem is with the dispenser itself, it may be easier to replace the entire dispenser.


Enter your model number to see parts for your dishwasher.
Help me find my model number

Dispenser Door Spring

If the dispenser is broken and doesn't open during the wash cycle the dispenser door spring may have to be replaced.


Enter your model number to see parts for your dishwasher.
Help me find my model number

Dispenser Latch

If the dispenser is broken and doesn't open or close properly the dispenser door latch may have to be replaced.


Enter your model number to see parts for your dishwasher.
Help me find my model number

Dispenser Door Pin

If the dispenser is broken and doesn't open or close properly the dispenser door pin may have to be replaced.


Enter your model number to see parts for your dishwasher.
Help me find my model number

Dispenser Actuator

If the dispenser is broken and doesn't open or close properly the dispenser actuator may have to be replaced.


Enter your model number to see parts for your dishwasher.
Help me find my model number

Dispenser

If the dispenser is broken and doesn't open or close properly the entire dispenser assembly may have to be replaced.


Enter your model number to see parts for your dishwasher.
Help me find my model number

Wax Motor

There is an electrically powered device called a wax motor which opens the detergent dispenser. If the dispenser is broken and will not open to release the detergent, the wax motor might need to be replaced.


Enter your model number to see parts for your dishwasher.
Help me find my model number

Bi-Metal

If the dishwasher dispenser doesn't work the bi-metal actuator might be burned out or defective. The bi-metal is a simple metal loop which acts as a latch for the dispenser door. As electricity is applied to the metal loop, the loop deforms and bends away from the latch, releasing it. If the bi-metal is burned out it won't deform or release the detergent door.


Enter your model number to see parts for your dishwasher.
Help me find my model number

Dispenser Slide

If the dispenser is broken and doesn't open or close properly the dispenser slide may need to be replaced.


Enter your model number to see parts for your dishwasher.
Help me find my model number

Dispenser Repair Kit

If the dispenser is broken this dispenser kit may need to be replaced.


Enter your model number to see parts for your dishwasher.
Help me find my model number

Main Control Board

The main control board provides power to nearly every component of the dishwasher including the detergent dispenser. If the dispenser will not actuate the main control board might be defective. You should first check for more common parts. Many times control boards are replaced unnecessarily because the problem was not diagnosed properly.

follow this steps and fix it. God bless you

Dispenser Lever

If the dispenser is broken and doesn't open or close properly the dispenser lever might need to be replaced.


Enter your model number to see parts for your dishwasher.
Help me find my model number

Detergent Dispenser Cover

If the detergent dispenser cover is broken and the detergent dispenser doesn't work, the dispenser assembly should be replaced.


Enter your model number to see parts for your dishwasher.
Help me find my model number

Wax Motor Actuator

If the dispenser will not release the detergent the actuator connected between the wax motor and the dispenser might be broken. Check the wax motor actuator and replace it if necessary.


Enter your model number to see parts for your dishwasher.
Help me find my model number

Detergent Container

If the dishwasher dispenser doesn't work the detergent container may need to be replaced.


Enter your model number to see parts for your dishwasher.
Help me find my model number

Dispenser Lid

If the dispenser is broken and doesn't open or close properly the dispenser lid may have to be replaced.


Enter your model number to see parts for your dishwasher.
Help me find my model number

Detergent Dispenser

If the dishwasher dispenser doesn't work the problem is often related to the release mechanism. If the problem is with the dispenser itself, it may be easier to replace the entire dispenser.


Enter your model number to see parts for your dishwasher.
Help me find my model number

Dispenser Door Spring

If the dispenser is broken and doesn't open during the wash cycle the dispenser door spring may have to be replaced.


Enter your model number to see parts for your dishwasher.
Help me find my model number

Dispenser Latch

If the dispenser is broken and doesn't open or close properly the dispenser door latch may have to be replaced.


Enter your model number to see parts for your dishwasher.
Help me find my model number

Dispenser Door Pin

If the dispenser is broken and doesn't open or close properly the dispenser door pin may have to be replaced.


Enter your model number to see parts for your dishwasher.
Help me find my model number

Dispenser Actuator

If the dispenser is broken and doesn't open or close properly the dispenser actuator may have to be replaced.


Enter your model number to see parts for your dishwasher.
Help me find my model number

Dispenser

If the dispenser is broken and doesn't open or close properly the entire dispenser assembly may have to be replaced.


Enter your model number to see parts for your dishwasher.
Help me find my model number

Wax Motor

There is an electrically powered device called a wax motor which opens the detergent dispenser. If the dispenser is broken and will not open to release the detergent, the wax motor might need to be replaced.


Enter your model number to see parts for your dishwasher.
Help me find my model number

Bi-Metal

If the dishwasher dispenser doesn't work the bi-metal actuator might be burned out or defective. The bi-metal is a simple metal loop which acts as a latch for the dispenser door. As electricity is applied to the metal loop, the loop deforms and bends away from the latch, releasing it. If the bi-metal is burned out it won't deform or release the detergent door.


Enter your model number to see parts for your dishwasher.
Help me find my model number

Dispenser Slide

If the dispenser is broken and doesn't open or close properly the dispenser slide may need to be replaced.


Enter your model number to see parts for your dishwasher.
Help me find my model number

Dispenser Repair Kit

If the dispenser is broken this dispenser kit may need to be replaced.


Enter your model number to see parts for your dishwasher.
Help me find my model number

Main Control Board

The main control board provides power to nearly every component of the dishwasher including the detergent dispenser. If the dispenser will not actuate the main control board might be defective. You should first check for more common parts. Many times control boards are replaced unnecessarily because the problem was not diagnosed properly.

Dispenser Lever

If the dispenser is broken and doesn't open or close properly the dispenser lever might need to be replaced.

Detergent Dispenser Cover

If the detergent dispenser cover is broken and the detergent dispenser doesn't work, the dispenser assembly should be replaced.

Wax Motor Actuator

If the dispenser will not release the detergent the actuator connected between the wax motor and the dispenser might be broken. Check the wax motor actuator and replace it if necessary.

Detergent Container

If the dishwasher dispenser doesn't work the detergent container may need to be replaced.

Dispenser Lid

If the dispenser is broken and doesn't open or close properly the dispenser lid may have to be replaced.

Detergent Dispenser

If the dishwasher dispenser doesn't work the problem is often related to the release mechanism. If the problem is with the dispenser itself, it may be easier to replace the entire dispenser.

Dispenser Door Spring

If the dispenser is broken and doesn't open during the wash cycle the dispenser door spring may have to be replaced.

Dispenser Latch

If the dispenser is broken and doesn't open or close properly the dispenser door latch may have to be replaced.

Dispenser Door Pin

If the dispenser is broken and doesn't open or close properly the dispenser door pin may have to be replaced.

Enter your model number to see parts for your dishwasher.

Dispenser Actuator

If the dispenser is broken and doesn't open or close properly the dispenser actuator may have to be replaced.

Dispenser

If the dispenser is broken and doesn't open or close properly the entire dispenser assembly may have to be replaced.

Enter your model number to see parts for your dishwasher.

Wax Motor

There is an electrically powered device called a wax motor which opens the detergent dispenser. If the dispenser is broken and will not open to release the detergent, the wax motor might need to be replaced.

Enter your model number to see parts for your dishwasher.

Bi-Metal

If the dishwasher dispenser doesn't work the bi-metal actuator might be burned out or defective. The bi-metal is a simple metal loop which acts as a latch for the dispenser door. As electricity is applied to the metal loop, the loop deforms and bends away from the latch, releasing it. If the bi-metal is burned out it won't deform or release the detergent door.

Enter your model number to see parts for your dishwasher.

Dispenser Slide

If the dispenser is broken and doesn't open or close properly the dispenser slide may need to be replaced.

Enter your model number to see parts for your dishwasher.

Dispenser Repair Kit

If the dispenser is broken this dispenser kit may need to be replaced.

Enter your model number to see parts for your dishwasher.

Main Control Board

The main control board provides power to nearly every component of the dishwasher including the detergent dispenser. If the dispenser will not actuate the main control board might be defective. You should first check for more common parts. Many times control boards are replaced unnecessarily because the problem was not diagnosed properly.

God bless you . see the photo attached.

Dispenser Lever

If the dispenser is broken and doesn't open or close properly the dispenser lever might need to be replaced.

Detergent Dispenser Cover

If the detergent dispenser cover is broken and the detergent dispenser doesn't work, the dispenser assembly should be replaced.

Wax Motor Actuator

If the dispenser will not release the detergent the actuator connected between the wax motor and the dispenser might be broken. Check the wax motor actuator and replace it if necessary.

Dispenser Lid

If the dispenser is broken and doesn't open or close properly the dispenser lid may have to be replaced.

Detergent Dispenser

If the dishwasher dispenser doesn't work the problem is often related to the release mechanism. If the problem is with the dispenser itself, it may be easier to replace the entire dispenser.

Dispenser Door Spring

If the dispenser is broken and doesn't open during the wash cycle the dispenser door spring may have to be replaced.

Dispenser Latch

If the dispenser is broken and doesn't open or close properly the dispenser door latch may have to be replaced.

Dispenser Door Pin

If the dispenser is broken and doesn't open or close properly the dispenser door pin may have to be replaced.

Dispenser Actuator

If the dispenser is broken and doesn't open or close properly the dispenser actuator may have to be replaced.

Dispenser

If the dispenser is broken and doesn't open or close properly the entire dispenser assembly may have to be replaced.

Wax Motor

There is an electrically powered device called a wax motor which opens the detergent dispenser. If the dispenser is broken and will not open to release the detergent, the wax motor might need to be replaced.

Bi-Metal

If the dishwasher dispenser doesn't work the bi-metal actuator might be burned out or defective. The bi-metal is a simple metal loop which acts as a latch for the dispenser door. As electricity is applied to the metal loop, the loop deforms and bends away from the latch, releasing it. If the bi-metal is burned out it won't deform or release the detergent door.

Dispenser Slide

If the dispenser is broken and doesn't open or close properly the dispenser slide may need to be replaced.

Dispenser Repair Kit

If the dispenser is broken this dispenser kit may need to be replaced.

Main Control Board

The main control board provides power to nearly every component of the dishwasher including the detergent dispenser. If the dispenser will not actuate the main control board might be defective. You should first check for more common parts. Many times control boards are replaced unnecessarily because the problem was not diagnosed properly.

Gd bless you

If the dispenser is broken and doesn't open or close properly the dispenser lever might need to be replacedIf the detergent dispenser cover is broken and the detergent dispenser doesn't work, the dispenser assembly should be replaced.
If the dispenser will not release the detergent the actuator connected between the wax motor and the dispenser might be broken. Check the wax motor actuator and replace it if necessary.
God bless you

Hi,


1. The most common problem with the detergent doors on KitchenAid dishwashers is that they either don't open during the cycle or open only halfway. Before looking into more complicated repairs, make sure that the door is able to open. Check the seal around the door and the door latch for soap- and food-related gunk, and scrub it off if present. Sometimes this can keep the detergent door from operating properly. Consider switching detergents, as some liquids and pouch-style dish detergents can gum up the detergent dispensers. Also, make sure that there is nothing blocking the detergent door when the dishwasher is loaded. Because of the location of the detergent door, a large item such as a cookie sheet or a pan can prevent the door from opening. Run the dishwasher through a cycle without anything placed in front of the detergent dispenser and see if that solves the problem.
Broken Timer
2. KitchenAid dishwashers rely on an internal timer to complete the wash cycle properly. When this timer malfunctions, certain steps in the wash process (such as the release of soap from the detergent dispenser) can be interrupted. If the dishwasher detergent door is either not opening or appears to be opening late in the cycle, this is likely the mechanical culprit. A broken timer isn't something that's simple to replace without knowledge of dishwasher repair, so it's best to consult a professional if you suspect that this is the problem.
Malfunctioning Door Components
3. For the detergent door to function properly, all of its mechanical components must be in working order. Older dishwashers' detergent doors rely on a spring-loaded hinge to pop all the way open when the timer gives the signal. If the door doesn't swing all the way open instantly when it's manually released, the spring may need to be replaced for the dispenser to operate properly. If the particular model is newer and does not rely on a spring to open the door, chances are it either uses a wax motor or a bi-metal switch to release the detergent door at the appropriate time. If either of these components is dying, that can mean that the detergent dispenser will not operate properly.

thank you
vijay(vote for me)

Replace the waxmotor and the problem should be gone

It is most likely the flip spring...you need to be certain that the legs of the spring are inside the door edge and the spring does not swing freely...and there must be tension on the spring so that when the latch releases the door flips...you can also try this with an elastic, put the elastic inside the closed door and up around the drying solution knob, this will let the door flip open showing that the latch does work

The opening of this dispenser is controlled by a wax motor for release. If you are unable to keep the latch shut you are probably looking at the spring and latch assy. This is not a hard job, but you have to open the inner door to get at the latch. Part numbers for the spring disp. flap is 912547. The latch (inside door) is 99001291. If you take your time and observe carefully the job will be easy. Catriver, post back.