How to I get the pot to stay on - Euro-Pro KC260LC 6Quart Slow Cooker

remove the pin and clean the pin and orifice.

...You can Heat Or Cook a Roast Beef in your Hamilton Beach
Crockpot. Never use ANY of its Parts in a Regular Gas or Electric
Oven! Remember to Spray the inside of the Crockpot with a little PAM, before you cook, and add a little Water also...Not much...just a little; as foods will always Add their own juices.

That has got to be a malfunction of the unit unless something like a GFI is tripping. Best to pursue warranty replacement since it is new.
Contact manufacturer

need anew one then.

The Use and Care Manual for the Hamilton Beach 33163 Stay or Go Slow Cooker can be downloaded in PDF from the following link:

http://useandcares.hamiltonbeach.com/files/840175000.pdf

take to prof dealer.............

The Use and Care Manual for the Hamilton Beach 33162 Stay or Go Stainless Steel 6-Quart Slow Cooker can be found here:

http://useandcares.hamiltonbeach.com/files/840175000.pdf

Thank you for using FixYa!

Why not put the pot on a trivet. I think the rubber feet may only be there to stop your surfaces getting scratched or heat marked.

Try going to MarBeck.com they are a great source for small appliace parts.
http://www.marbeck.com

most slow cookers have a flexible element in the bottom of the cooker. the porcelain "pot" fits into the shell or outside of the cooker. heat rises so naturally the outside of the pot will heat up after the pot and anything in it heats up. (radiated heat) some have insulation around the inside of the shell to slow down the heat convection but will heat up eventually. that's why they all have phenolic handles. if they didn't heat up then would you need handles?