Hello, I am having a micro-star, model:ms-7061 ver:1.0+, N1996, with AMD sempron(tm) 1.20GHz Please let me know the maximum memory I can install on my PC?

ms 7352 driver ver 1.0

Supports up to 2GB PC1600/PC2100/PC2700/PC3200 DDR SDRAM

There are three different MS-7061 Retail Mainboards:

http://global.msi.eu/index.php?func=searchresult&keywords=7061

Please find out, which one you have and got to the product site. You should find the proper drivers there.

Hi Ryan,
Open the link below provided by MSI for MB;
(MSI KM3M-V / MS-7061). Bios, Driver, Utility and Manual. You'll find you can install up too, 2GB of memory on this board.
You can also install and run 2x 1.5GBs serial ATA SATA drive's as well as serial ATA IDE drive's.
http://www.msi.com/index.php?func=downloaddetail&type=driver&maincat_no=1&prod_no=590

If you need more help let me know.
Cheers'
Mike

Be sure to download the file(s) for your operating system

MSI K9MM-V Drivers

please visit this page http://www.msi.com.tw/program/support/manual/mnu/spt_mnu_detail.php?UID=610&kind=1 and download the manual. you will need to have adobe acrobat installed to read the manual.

search micro star international / support...best downloads always come from TW...taiwan site..

ok

1. Go to: http://www.msi.com/index.php?func=downloadindex
2. In the section labeled "OR Type 2.Manually Download", select "Mainboard" from the first drop-down menu.
3. Select "AMD Platform" from the second drop-down menu.
4. Select "Socket A" from the third drop-down menu.
5. Select "VIA" from the fourth drop-down menu.
6. Select "VIA ProSavageDDR KM266" from the fifth drop-down menu.
7. Select "KM3M-V" from the sixth drop-down menu.
This will bring you to a page having all the specs of your motherboard.

Note: MS-7061 is also known as KM3M-V

try to remove the cmos battery from the motherboard and insert again...it will reset ur bios password...

The only way to to fix this if your headers on your wires aren't labeled is to trace them back from the switch it self. Usually they are white and red. The orientation on the motherboard pins doesn't matter since it's only a switch. Make sure you are putting the plug onto the power switch jumpers, and not the power led, reset, etc..