Memory damaged - Roland Spd-S Sampling Percussion Pad System

1. check for keyboard stuck keys.
2. Clean memory and Memory slot well and fix back memory.
3. check capacitors close to the memory slot if they are not damaged, if damaged replace the capacitor with a new capacitor.

Phase 1
After power button pressed, computer will detect 5 components :
1. Power supply - OK (enough power)
2. Main-board - OK
3. Processor - OK
4. Memory - OK
5. Video Card / VGA - OK
== beep sound .. (1 time) or on the monitor, display appears BIOS ==

The characteristics of damage to power supply
1. Power supply fan does not spin

Video power supply fan not spinning

If the power supply fan is not spinning, the possible cause of damage to power supply. Solution, replace the power supply.

How to check the damage to power supply
2. Power supply is weak (resulting voltage power supply can not turn on the computer or the voltage is less)
The characteristics of damage to the processor

Normal fan without processor
Normal fan with processor


Based on experience, the possibility of damage processors is very small. To check for damage to the processor, install the processor to another computer (for comparison).


The characteristics of main-board damage
Because the new main-board, so the possibility of the main-board damage, very small. The characteristics of damage to the main-board, when the power button is pressed
1. Power supply fan not spinning
2. Processor fan is not spinning
3. Casing lamp is not lit
4. Main-board lamp does not light


The characteristics of the memory damage or dirty memory
1. The characteristics of normal memory, but installation is not correct or dirty

When the computer is turned on, the sound


Solution



Picture a
Release Memory

Picture b
Clean the memory slots with a brush

Picture c
Clean the gold layer memory with a pencil eraser

Picture d
Reinstall the memory correctly

The characteristics of damage to video cards


Solution, remove the video card, clean the gold layer with a pencil eraser.

I hope this information helps.

Hi martin oclar,

Maybe your memory card is damage, try to use other memory card and check if it works. when it works maybe your memory card got a problem or maybe its not compatible, to verify it try to put that memory card that you think is damage to other camera device.

Hope This Helps ^ ^,

Webby101

once USB is damage there is no way to retrieve data from it. but you can try to get all data using DOS command.

maybe your memory card is damaged or corrupted... check it by inserting other memory card... if your phone CAN read other memory card it means that your memory card is damaged or corrupted... and if the other memory card you inserted and still the same problem persist that your phone thus not read memory card... maybe there is something wrong with your phone... it can't detect a memory card...

options:
- replace new memory card (if damaged)
- go to the cellphone technician and have that phone fix..

goodluck...

Memory Card Error Messages

Fully Corrupt:
When the entire save area of the Memory Card becomes corrupt, the system will inform the player that the Memory Card is corrupt and offer to format it. The card must be formatted before gameplay begins or when the game attempts to access the Memory Card. The exact message may vary from software to software.

Follow the steps for formatting a memory card.

For specific issues with the Memory Card 1019, please click here.

Suggestion: It is always a good idea to copy your most important files to a second Memory Card as a back-up.
Data Area Only Corrupt:
When only the data area of a Memory Card is corrupt (not the entire Memory Card) the game may not detect this until the Memory Card is accessed. Once it is accessed, the game will inform the player that the file being accessed is corrupt and must be erased. The game will only delete the one file being accessed and will not format the entire Memory Card (Other saved game files on the Memory Card may be OK).

Follow the steps for deleting a file.

For specific issues with the Memory Card 1019, please click here.

Memory Card is Damaged:
If the Memory Card has been physically damaged, or has been damaged beyond repair, you will get this message. The Memory Card will need to be replaced. The system may attempt to format the card, but if it cannot it will give the error Memory Card is Damaged. There is no way to recover the game data from the memory card.

For information on locating replacements for older products, please click here.

For specific issues with the Memory Card 1019, please click here.

Suggestion: It is always a good idea to copy your most important files to a second Memory Card as a back-up.

With regards to your problem with Kingston 4Gb memory card, I am happy to share to you the following diagnosis:

1. Make sure that your memory card is not damage. Upon buying you need to test it;
2. Maybe the memory card is not properly formatted as NTFS or FAT32 depending on the machines' specifications but usually this particular storage device must be formatted into FAT32; or
3. It happens that your PC and camera couldn't recognize the card because maybe the card reader of both gadget were damage and definitely will require to buy a new one.

Your pc memory is either loose or it is damage. Just try to open your CPU and detached the memory from the memory slot. try to clean it by using smooth brush. if these doesnt solve your problem your memory is damage.

Compare the damaged memory-card with a non-damaged memory-card.

If you've broken-off the gold-coloured contacts from the edge of the memory-card, then your memory-card is broken beyond repair.

Tough luck.

Hi...

The cause of beeping is the memory problem. maybe the memory stick is not inserted correctly. If your memory stick will not correctly inserted it will damaged the memory slot. Try to use the other slot, if the same thing happen. You memory slot will be damaged you need to bring you motherboard to the computer repair center. Ask first how you will pay, if the labor cost is high. its better to buy a brand new motherboard.

Regards.
ICmanServer