AS DESCRIBED ABOVE I HAVE A PHILIPS COMBO VCR/DVD PLAYER DVP3340V/17 AND CANNOT CONNECT WIRES CORRECTLY. HELP!
DAVE PLUMER
[email protected]
trying to connect a vcr/dvd player to a tv that has dvd/vcr player in tv.
Please use this link to download the user manual for your player:
http://safemanuals.com/user-guide-instructions-owner-manual/PHILIPS/DVP3345V-17-_E
Good luck..............
Remember always your TV is IN or INPUT connection,the yellow color is the video, the red and white is the audio.Take the remote and press the button TV/VIDEO when you are in ,press it again to navigate video 1,,video 2,,video 3 and choose there..try this maybe of help...
Here is a picture on how to connect both devices.
Observe and write down input-output jacks behind combo and tv and use appropriate cables.
Just connect it to tv using the cables red/white/yellow the red and white cables are for audio and the yellow cable is for video. depends where your chose to place or connect it most tvs now has 3 sources inputs 1,2,3 1&2 souce can be found at the back and usaually 3 can be found in front or at the side...if you want to chang the input of your tv just predd video on remote...keep on pressing it to choose 1,2 or 3....
Make sure on your dvd player the rca leads are going into the out,,out puts and going into the in on your tv then press av till it comes up also the rca leads your using might be had it strecthed or something like that
HI-
Check this site for Info's how to connect your device, click HERE
keep me posted for inquiries, thanks!
Good Day,
The dvd/vcr combo can be hooked up one of two ways. I the TV has yellow/red/white jacks on the back or side, just match up the colors on both sides. Once plugged in you will have to change the source of the TV, to do this you need to press a button on the remote, it can be labeled as input,video1, tv/vcr, or source. However if the TV does not have red white & yellow jacks you have too hook it up using RF.
On the back of the dvd/vcr it should have two coax jacks, on is labeled RF IN the other RF out. Run a cable from RF out directly to the TV. If you have cable or an antennae on the TV now just unplug it and plug it into RF IN on the dvd/vcr.
Hope this helps and good luck
SOURCE: CONNECTING DVD/VCR TO CABLE BOX & TV ETC
If using 3 color RCA (r/w/y) the red and white is audio and should go into your stereo under video or AUX. The yellow is the only video cable you need, that should go to your TV aux in or video1 or video2. You can also put all 3 colors into the tv and then run another red/white OUT to the stereo AUX in and have stereo sound for whatever you are watching.
385 views
Usually answered in minutes!
need help setting up a magnavox dvd/vcr player to a tv that has a dvd player in it. have tried yellow/white/red connection but still is not working. also cable attached to tv.
×