I didint have the instruccion or manuel so i need to know how can i used properly its a UL 1159 s60

Watch instructions here I think. A full make and model are useful rather than guessing
https://static1.squarespace.com/static/58ca120515d5db2d0e0f609e/t/58da90d4be6594b226a75890/1490718936270/UNLISTED-GENERAL-ANALOG-DIGITAL-INST.pdf

Or any of these?

UL 1002 - UL Standard for Safety Electrically Operated Valves ...

standards.globalspec.com > std

Nov 30, 2006 - Find the most up-to-date version of UL 1002 at Engineering360.

Other Standards > Underwriters Laboratory Inc. > UL 1002

www.roadauthority.com > Standards

UL 1468 Direct Acting Pressure Reducing and Pressure Restricting Valves. UL 1469 Backflow special check valves of 3/4-inch (19.1-mm) through 10-inch ...

UL 1002 : UL Standard for Safety Electrically Operated Valves ...

global.ihs.com > doc_detail

UL 1002, 7th Edition, November 30, 2006 - UL Standard for Safety Electrically Operated Valves for Use in Hazardous (Classified) Locations These requirements ...

Kurt S. Adler Replacement Bulb for UL1002, 3 Piece Set, Multi ...

www.amazon.ca > Replacement-Bulbs-Ul1002-Bubble-...

Kurt S. Adler Replacement Bulb for UL1002, 3 Piece Set, Multi, C7: Amazon.ca: Home & Kitchen.

Try fitting a new battery and make sure the winder used to adjust the hands is pushed all the way in. Some watches have a 'stop' feature when you pull the adjuster out.

They all work pretty much the same, once you get use to setup you can figure it out on any. Here is a link below
http://www.genevawatchgroup.com/wp-content/uploads/2012/12/Zoo-York-Digital-Watch-Instruction-1.pdf

i am not understanding ......

you need Manuel for replacing battery ?

or

you need Manuel for setting up digital part of your watch ?

go here > http://www.citizenwatch.com/en-us/support/setting-instructions/

For the UL 1102 S60, how do you open it to change the batteries?

The movement in this Elgin is made by Citizen. After you change the battery, you need to reset the hands so that the watch functions properly. Select chronograph function with lower-right button. Then pull-out the same button. Push the upper left button to select the UTC, hour, and minute hands. Then use lower-left and upper-right buttons to make sure everything is aligned to 12:00 position. After setting the hands to 12:00, push in lower right button. Now you can set the time by selecting the SET using the lower right button. Pull out the same button and choose your time zone to set.

if it a eco drive .it will charge from solar energy