Ho do I switch the child lock off? - LG 24 in. LDS 5811ST Stainless Steel Built-in Dishwasher

check the link below google has many answers IF YOU ASK them

https://www.google.com/search?q=Gaggenau+wall+oven+%26+now+the+lock+button+flashes%2C+beeps+and+won%27t+allow+oven+to+turn+on+or+heat+up.&oq=Gaggenau+wall+oven+%26+now+the+lock+button+flashes%2C+beeps+and+won%27t+allow+oven+to+turn+on+or+heat+up.&aqs=chrome..69i57&sourceid=chrome&ie=UTF-8

Have switched this on?

Child-proof lock
? You can protect the appliance from being tampered by activating the child-proof lock.
? When activated, no change can be made to the programme running.
To activate the child-proof lock:
1 Press the 1st and 2nd additional function buttons for 3 seconds.
2 The "C ON" (child lock is activated) symbol appears on the screen.
Note: the child lock symbol will also be displayed whenever any button is pressed while the
machine is child-locked.
3 The child-proof lock lamp on the programme follow-up indicator will light up when the childproof lock is activated.
To deactivate the child-proof lock:
1 Press the 1st and 2nd additional function buttons for 3 seconds.
2 The "C OFF" (child-proof lock is deactivated) symbol appears on the screen.
3 The child-proof lock lamp on the programme follow-up indicator will go off when the child-proof
lock is deactivated.

The child safety lock on the car doors is usually controlled by a switch that is located along the outside edge of the door. Open the door and look along the outside edge of the door for a small switch. This switch sets the child safety lock to on or off. The switch may look similar to the photo I've included. If you still cannot find the child safety lock, please check the owner's manual for your car.

You may have the child-lock or control-lock function activated. Or if you have the short-cycle activated, you will not be able to activate the high-temp or sani-wash functions, because the dishwasher will not have time to heat the water to the required temperature.

If you need further help, reach me via phone at https://www.6ya.com/expert/ronald_e6b9572cebe3ad27

mr. vinod ji mere mobile ka pattern lock ho gaya hi mere child se 10 times

Hi there,

You can use the child lock feature in 2 ways.

1. To prevent operation of the washing machine when no wash cycle is running

To set this feature, switch the machine on using the POWER button at the top-left of the control-panel. Next, press and hold both the SPIN and RINSE buttons for about 3 seconds - until the child lock light indicator on the control panel illuminates. All functions of the washing machine will now be disabled apart from POWER ON/OFF until such time as the child lock is deactivated.

To deactivate the child lock, press and hold the SPIN and RINSE buttons again until the child lock light indicator on the control panel goes out.

2. To prevent any tiny fingers from tampering with the machine while a program is running.

After pressing the START/PAUSE button to start the wash cycle, press and hold the SPIN and RINSE buttons until the child lock light indicator illuminates. All buttons on the control panel will now be disabled until the child lock has been disabled. When the wash cycle has finished, you will need to switch the child lock off again to reactivate the buttons. Once you have finished using the washer, reactivate the child lock again before switching the power off as above.

The feature can also be used when using the delayed start feature, but needs to be set after pressing the START/PAUSE button.

Hope this helps. Please let me know if I can be of further assistance.

Regards,
BElectric

Show me how to take the safety child lock off switch also I need a picture of this location on the door

Did you check to see if the child safety lock may have been activated? If so the door will only open from the outside.Try removing the power door lock switch/arm rest assembly to see if the door lock switch can be jumped out in the event the door lock switch is burnt out.
Does the Infiniti have an exterior key lock cylinder on the rear door? If so try to get a key to open the lock, it may be very difficult to remove the door panel when the door is sealed closed, but if you can that may be your only salvation short of attemting anslim jim door opening tool down the side of the door glass in ho[pes to trip the door linkage lock thus opening the door.

there is a slider switch on the door(between door and frame) that you can lock or unlock the child locks to prevent them from opening the door from inside but still can open door from outside----just slide the lock switch to enable or disable the child lock.

if they are stuck/stiff---you may have to remove the door panel for repair.

Usually they work free with a liitle lubricant(WD-40) to slide easier.

HI I KNOW IT SOUNDS DAFT BUT HAVE YOU TRIED SWITCHING THE CHILD LOCK OFF? I CANT REMEMBER EXACTLY WHICH BUTTONS IT IS ON YOUR MODEL BUT YOU USUALLY HAVE TO PRESS 2 BUTTONS AT THE SAME TIME (& SOMETIMES HOLDING THEM FOR A COUPLE OF SECONDS) RATHER THAN JUST 1 TO SWITCH THE CHILD LOCK ON/OFF. IF YOU STILL HAVE THE INSTRUCTION MANUAL IT WILL TELL YOU WHICH BUTTONS YOU PRESS TO SWITCH CHILD LOCK ON/OFF HOPE THIS HELPS!