Instruction for holiday time majestic pine christmas tree setup.

Question edited for clarity and retype text in CAPS.
Question moved from Cars and Trucks category.

There should be instructions in the box? All the connectors should be marked. The base has a mains plug and then there is normally a multi-way connector with letters A-A, B-B, C-C etc on the strands. These new mini LED Lights have a connector at both ends, so you just daisy chain them all together.

There are lots of places selling them, but no online instructions yet.

https://www.google.com/search?q=Jaclyn+Smith+Today+7+ft+Cashmere+Pine+Christmas+tree+instructions

..

Plug in the lights to make sure all the bulbs are working. Starting at the top of the tree, intertwine the lights on top of and under branches. Work your way down and around the tree, hanging lights in the back as well. When you reach the bottom, hide any extra lights behind the tree

Question edited for clarity.

The link says it has a reset

https://www.google.com/search?q=gemmy+holiday+light+show+4+feet+christmas+tree+not+working+properly

..

Many pine tree species are fast growers.

Moving a large tree like that is very, very expensive because a crane and large truck are required. It can also be easily damaged. It is much easier to use an artificial one which is light and can be stored and re-used.

Write to the mayor in the cities you think might be interested and the Mayor's office will pass it to the appropriate member of staff to consider and reply. They are typically short of money and you will be very unlikely to get a positive reply.

No, it is a myth. The White House said

"There is no truth to this, and the letter referenced ............ does not exist. No letter has gone out yet from the White House pertaining to Christmas tree ornaments. The trees in the White House will be called Christmas trees, and the tree on the Ellipse will be called the National Christmas Tree. There will be no name changes.

The manager at target may be able to help. or you may find something if you Google it.

Your sweeper may have overheated. I don't know what brand you have but I hope you weren't trying to vacuum pine needles from the Christmas tree. Pine needles are sticky and will clog up any vacuum sweeper. Check your sweeper to make sure the tubes (hose & pipes that carry dirt) are clean and clear. I used to service Oreck vacuum sweepers.

Call Everstar customer service 1800 833-3390 They do NOT have a website. I think because they are a bunch of retired christmas elves without internet service.

I would contact walmart first.

I have a 3 piece Everstar 7/12 slim pine and here are the plug portion of the assemblly instructions . "1) connect the plug(A1) of string with the end cord (B1) of string. 2) Insert the plug (B2 & C1) of string into the wall outlet. 3) After the plugs are plugged into the wall outlet your entire tree should be lit. If some bulbs do not light, search for any loose plugs, broken, loose or missing bulbs that may have caused the problem."
My illustration shows the A1 in the top section of the tree while B1 is in the middle section. Both the middle section and bottom section get plugged into the wall or extension cord. Hope this helps